特性

• Compliant with FlexRay Electrical Physical Layer Specification Rev 3.0.1
• FlexRay Transmitter and Receiver in Normal-Power Modes for Communication up to 10 Mbit/s
• Support of 60 ns Bit Time
• FlexRay Low-Power Mode Receiver for Remote Wake-up Detection
• Excellent EMS Level Over Full Frequency Range. Very Low EME.
• Bus Pins Protected Against >10 kV System ESD Pulses
• Safe Behavior Under Missing Supply or No Supply Conditions
• Interface Pins for a Protocol Controller and a Host (TxD, RxD, TxEN, STBN, BGE, ERRN, CSN, SCK, SDO)
• Supply Pins VCC, VIO with Independent Voltage Ramp Up:- VCC Supply Parametrical Range from 4.75 V to 5.25 V- VIO Supply Parametrical Range from 2.3 V to 5.25 V
• TxEN Timeout and BGE Feedback
• Two Error Indication Modes- Track mode Error Signaling on ERRN Pin- Latched mode Status Register accessible via SPI
• Compatible with 14 V and 28 V Systems
• Operating Ambient Temperature -40C to +125C (TAMB_Class1)
• Junction Temperature Monitoring
• FlexRay Functional Classes- Bus Driver Bus Guardian Interface- Bus Driver Logic Level Adaptation- Bus Driver Remote Wakeup