• 简体中文
• English

54VCXH162245：Rad-Hard 16-bit Transceiver 3-state Non Inverting

The 54VCXH162245 is a low voltage CMOS 16-bit bus transceiver (3-state) fabricated with a sub-micron silicon gate and a five-layer metal wiring C²MOS technology. It is ideal for low power and very high speed (1.65 to 3.6 V) applications and can be interfaced to a 3.6 V signal environment for both inputs and outputs. This integrated circuit is intended for two-way asynchronous communication between data buses. The direction of data transmission is determined by digital input recorder (DIR) input. The two enable inputs, nG,can be used to disable the device so that the buses are effectively isolated. The device circuits include 26 Ω series resistance in the A port outputs. These resistors reduce line noise in high-speed applications. Bus hold on data inputs is provided to eliminate the need for external pull-up or pull-down resistors. All inputs and outputs are equipped with protection circuits against static discharge, giving them 2 kV ESD immunity and transient excess voltage. All floating bus terminals during high Z state must be held HIGH or LOW.

Key Features

• 1.65 V to 3.6 V inputs and outputs
• High speed A outputs:
  • tPD = 3.4 ns at VCC = 3.0 to 3.6 V
  • tPD = 4.3 ns at VCC = 2.3 to 2.7 V
• Symmetrical impedance A output:
  • |IOH | = IOL = 12 mA (min.) at VCC = 3.0 V
  • |IOH | = IOL = 8 mA (min.) at VCC = 2.3 V
• High speed B outputs:
  • tPD = 2.5 ns (max.) at VCC = 3.0 to 3.6 V
  • tPD = 3.2 ns (max.) at VCC = 2.3 to 2.7 V
• Symmetrical impedance A output:
  • |IOH | = IOL = 24 mA (min.) at VCC = 3.0 V
  • |IOH | = IOL = 18 mA (min.) at VCC = 2.3 V
• Power down protection on inputs and outputs
• 26 Ω series resistors in A port output
• Operating voltage range:
  • VCC (opr) = 1.65 V to 3.6 V
• Pin and function compatible with 54 series H162245
• Bus hold provided on both sides
• Cold spare function
• Latch-up performance exceeds 300 mA (JESD 17)
• ESD performance:
  • HBM > 2000 V (MIL STD 883 method 3015)
  • MM > 200 V
• 300 krad Mil1019.6 condition A (RHA QML qualification extension undergone)
• No SEL, no SEU, and no SET under 110 Mev/cm2/mg LET heavy ions irradiation
• QML qualified product
• Device fully compliant with DSCC SMD 5962-02508
• 100 mV typical input hysteresis

产品规格

Technical Notes & Articles

HW Model & CAD Libraries

选型指南

样片和购买

质量和可靠性