BlueNRG-MS：Bluetooth Low Energy Network Processor supporting Bluetooth 4.1 core specification
The BlueNRG-MS is a very low power Bluetooth low energy (BLE) single-mode network processor, compliant with Bluetooth specification v4.1. The BlueNRG-MS supports multiple roles simultaneously, and can act at the same time as Bluetooth Smart sensor and hub device.
The Bluetooth Low Energy stack runs on the embedded ARM Cortex-M0 core. The stack is stored on the on-chip non-volatile Flash memory and can be easily upgraded via SPI. The device comes pre-programmed with a production-ready stack image (whose version could change at any time without notice). A different or more up-to-date stack image can be downloaded from the ST web site and programmed on the device through the ST provided software tools.
The BlueNRG-MS allows applications to meet of the tight advisable peak current requirements imposed with the use of standard coin cell batteries. The maximum peak current is only 10 mA at 1 dBm of output power. Ultra low-power sleep modes and very short transition times between operating modes allow very low average current consumption, resulting in longer battery life. The BlueNRG-MS offers the option of interfacing with external microcontrollers using SPI transport layer.
Key Features
- Bluetooth specification v4.1 compliant master and slave single-mode Bluetooth low energy network processor
- Embedded Bluetooth low energy protocol stack: GAP, GATT, SM, L2CAP, LL, RF-PHY
- Bluetooth low energy profiles provided separately
- Operating supply voltage: from 1.7 to 3.6 V
- 8.2 mA maximum TX current (@0 dBm, 3.0 V)
- Down to 1.7 µA current consumption with active BLE stack
- Integrated linear regulator and DC-DC step-down converter
- Up to +8 dBm available output power (at antenna connector)
- Excellent RF link budget (up to 96 dB)
- Accurate RSSI to allow power control
- Proprietary application controller interface (ACI), SPI based, allows interfacing with an external host application microcontroller
- Full link controller and host security
- High performance, ultra-low power Cortex-M0 32-bit based architecture core
- Upgradable BLE stack (stored in embedded Flash memory, via SPI)
- AES security co-processor
- Low power modes
- 16 or 32 MHz crystal oscillator
- 12 MHz ring oscillator
- 32 kHz crystal oscillator
- 32 kHz ring oscillator
- Battery voltage monitor
- Compliant with the following radio frequency regulations: ETSI EN 300 328, EN 300 440, FCC CFR47 Part 15, ARIB STD-T66
- Available in QFN32 (5 x 5 mm) and WLCSP34 (2.66 x 2.56 mm) packages
- Operating temperature range: -40 °C to 85 °C
产品规格
应用手册
用户手册
编程手册
勘误手册
Design Notes & Tips
宣传册
STM32 Open Development Environment
| 型号 | 制造商 | Description |
|---|
| X-NUCLEO-IDB05A1 | ST | Bluetooth Low Energy expansion board based on SPBTLE-RF module for STM32 Nucleo |
Evaluation Tool Software
MCUs Embedded Software
| 型号 | 制造商 | Description |
|---|
| X-CUBE-BLE1 | ST | Bluetooth Low Energy software expansion for STM32Cube |
Wireless Connectivity Software
解决方案评估工具
| 型号 | 制造商 | Description |
|---|
| STEVAL-IDB005V1 | ST | Bluetooth low energy board based on the BlueNRG-MS network processor |
| STEVAL-IDB005V1D | ST | RF daughterboard platform based on BlueNRG-MS |
| STEVAL-IDB006V1 | ST | BlueNRG-MS based Bluetooth® Smart USB |
| STEVAL-WESU1 | ST | Wearable sensor unit reference design for fast time to market |
样片和购买
| 型号 | Package | Packing Type | Operating Temperature (°C) (min) | Operating Temperature (°C) (max) | Unit Price (US$)
* | Quantity | ECCN (EU) | ECCN (US) | Country of Origin |
|---|
| BLUENRG-MSQTR | VFQFPN32 5X5X0.9 3.6X3.6EP 0.5P | Tape And Reel | -40 | 85 | 1.5 | 1000 | 5A002A1A | 5A992C | PHILIPPINES |
| BLUENRG-MSCSP | WLCSP MSL1 | Tape And Reel | -40 | 85 | 1.45 | 1000 | 5A002A1A | 5A992C | - |
质量和可靠性
