| L99PM62GXP | Power Management IC with LIN and high speed CAN | Active | 18 | 6 | Open-Drain | true | PowerSSO 36 | 5Vx250mA; 5Vx100mA | 0.4 | HS-CAN,LIN | 3 | HSD 4x7000mΩ; HSD 1x1000mΩ; LSD 1x2000mΩ | HSD 4x0.12A; HSD 1x0.4A; LSD 2x0.1A |
| L5959 | Voltage regulator with very low stand-by current, reset, hold, backup, under/over voltage detection, overcurrent limitation | Active | 18 | 9 | Open-Drain | MW 15L | 8.5V@200mA; 8/10V@1A; 3.3V@800mA; 3.3V@100mA (stby) | 0.45 | HSD 1x2500mΩ; HSD 1x667mΩ | HSD 1x0.1A; HSD 1x0.3A |
| L5964 | Monolithic dual 3.5 A step-down switching regulator with LDO | Preview | 26 | 3.3 | Open-Drain | true | LQFP,VFQFPN 48 7x7x1.0 | adj@250mA |
| L5958 | Switchable linear voltage regulators with reset and battery voltage warning | Active | 18 | 9 | Open-Drain | OUTLINE FW 27 SMD | 8.5V@200mA; 5V@300mA; 3.3V@250mA; 1.8V@350mA; 3.3V@100mA (stby); 1.8V@100mA (stby) | 0.35 | CAN | HSD 1x278mΩ | HSD 1x2A |
| L9952GXP | Power management system IC | Active | 18 | 6 | Open-Drain | true | PowerSSO 36 | 5Vx250mA; 5Vx100mA | 0.4 | LIN | 4 | HSD 4x1000mΩ; HSD 1x1000mΩ; LSD 2x2000mΩ | HSD 4x0.12A; HSD 1x0.4A; LSD 2x0.1A |
| L99PM62XP | Power management IC with LIN and high speed CAN | Active | 18 | 6 | Open-Drain | true | PowerSSO 36 | 5Vx250mA; 5Vx100mA | 0.4 | HS-CAN,LIN | 4 | HSD 4x1000mΩ; HSD 1x1000mΩ; LSD 2x2000mΩ | HSD 4x0.12A; HSD 1x0.4A; LSD 2x0.1A |
| L9758 | Multiple supply for engine control | Active | 26.5 | 4 | Open-Drain | false | PowerSO 36 | 2.6/3.3V@10mA (stby); 1/1.5V@10mA (stby); 5V@1A; 2.5/3.5V@1A; 4 x adj@50mA | 2 |
| L99PM72GXP | Advanced power management system IC with embedded LIN and high speed CAN transceiver supporting CAN Partial Networking | Active | 18 | 6 | Open-Drain | true | PowerSSO 36 | 5Vx250mA; 5Vx100mA | 0.4 | HS-CAN,LIN | 4 | HSD 4x1000mΩ; HSD 1x1000mΩ; LSD 2x2000mΩ | HSD 4x0.12A; HSD 1x0.4A; LSD 2x0.1A |
| L5957 | Voltage regulator with ignition comparator, reset, overcurrent protection, 5V regulator (CAN) with independent enable | Active | 18 | 9 | Push-Pull Active High | MW 15L,PowerSO-20 | 8.5V@500mA; 5V@800mA ; 3.3V@800mA; 5V@300mA (stby) | HSD 1x278mΩ | HSD 1x2A |
| L5950 | Voltage regulator with I2C bus, very low stand-by current and low spread output voltage | Active | 26.5 | -0.6 | MW 15L | 10V@350mA; 8.5V@175mA ; 5V@350mA ; 8/10V@1A; 5V@250mA | 0.9 | 5 | HSD 1x500mΩ;HSD 2x2000mΩ; | HSD 1x2A; HSD 2x0.45A; |
| L4954 | Voltage regulator with backup and reset, overvoltage protection and low voltage warning | Active | 26.5 | -0.26 | Open-Drain Active Low | MW 15L | 10V@40mA; 8.5V@175mA ; 5V@650mA; 5V@100mA | HSD 1x2A; HSD 2x0.3A |
| L5956 | Voltage regulator with ignition comparator, reset, overcurrent protection and 3.3V regulator with independent enable | Active | 18 | 9 | Push-Pull Active High | MW 15L,PowerSO-20 | 8.5V@500mA; 5V@800mA; 3.3V@800mA; 5V@300mA (stby) | 0.6 | HSD 1x2A |
| L5963 | Dual monolithic switching regulator with LDO and HSD | Active | 26 | 3.5 | false | PowerSSO 36,VFQFPN 48 7x7x1.0 | adj@250mA | HSD 1x0.5A |
| L5965 | Multiple power management for automotive vision and radar systems | Target | true | VFQFPN 48 7x7x1.0 | 1.3V@600mA; 4.1V@20mA |
| L4953G | Voltage regulator with backup and reset, ignition comparator and low voltage warning | Active | 18 | 11 | Active High | MW 15L | 5V@1A; 9.2V@500mA; 5V@100mA (stby) | 0.6 | HSD 1x2A |
| L99PM60J | Power Management IC with LIN transceiver | Active | 18 | 6 | Open-Drain | true | PowerSSO 16 | 5Vx100mA; | 0.3 | LIN | 2 | HSD 1x7000mΩ; LSD 2x2000mΩ | HSD 2x60mA; LSD 2x100mA |
| L5962 | Voltage regulator with dc-dc plus switchable linear regulators controlled by I2C bus | Active | 18 | 4.1 | PowerSO 36 | 5/8.5V@350mA; 3.3to10V@1A; 3.3/5V@150mA (stby) | 0.65 | 3 | HSD 2x0.5A |
| L99PM72PXP | Advanced power management IC, with embedded LIN and HS CAN transceiver, supporting CAN Partial Networking | Active | 18 | 6 | Open-Drain | true | PowerSSO 36 | 5Vx250mA; 5Vx100mA | 0.4 | HS-CAN,LIN | 4 | HSD 4x1000mΩ; HSD 1x1000mΩ; LSD 2x2000mΩ | HSD 4x0.12A; HSD 1x0.4A; LSD 2x0.1A |
