ST7LITES5Y0：8-BIT MCU WITH SINGLE VOLTAGE FLASH MEMORY, DATA EEPROM, ADC, TIMERS, SPI
The ST7LITE0x and ST7SUPERLITE (ST7LITESx) are members of the ST7 microcontroller family. All ST7 devices are based on a common industry-standard 8-bit core, featuring an enhanced instruction set.
The ST7LITE0x and ST7SUPERLITE feature FLASH memory with byte-by-byte In-Circuit Programming (ICP) and In-Application Programming (IAP) capability.
Under software control, the ST7LITE0x and ST7SUPERLITE devices can be placed in WAIT, SLOW, or HALT mode, reducing power consumption when the application is in idle or standby state.
The enhanced instruction set and addressing modes of the ST7 offer both power and flexibility to software developers, enabling the design of highly efficient and compact application code. In addition to standard 8-bit data management, all ST7 microcontrollers feature true bit manipulation, 8x8 unsigned multiplication and indirect addressing modes.
For easy reference, all parametric data are located in section 13 on page 81.
Key Features
- A/D Converter 8-bit resolution for 0 to VDD Fixed gain Op-amp for 11-bit resolution in 0 to 250 mV range (@ 5V VDD ) 5 input channels
- 1 Communication InterfaceSPI synchronous serial interface
- Development ToolsFull hardware/software development package
- Memories1K or 1.5 Kbytes single voltage Flash Program memory with read-out protection, In-Circuit and In-Application Programming (ICP and IAP). 10 K write/erase cycles guaranteed, data retention: 20 years at 55˚C.128 bytes RAM.128 bytes data EEPROM with read-out protection. 300K write/erase cycles guaranteed, data retention: 20 years at 55˚C.
- Interrupt Management 10 interrupt vectors plus TRAP and RESET 4 external interrupt lines (on 4 vectors)
- Clock, Reset and Supply Management3-level low voltage supervisor (LVD) and auxiliary voltage detector (AVD) for safe power- on/off proceduresClock sources: internal 1MHz RC 1% oscillator or external clock PLL x4 or x8 for 4 or 8 MHz internal clockFour Power Saving Modes: Halt, Active-Halt, Wait and Slow
- 2 Timers One 8-bit Lite Timer (LT) with prescaler including: watchdog, 1 realtime base and 1 input capture. One 12-bit Auto-reload Timer (AT) with output compare function and PWM
- Instruction Set 8-bit data manipulation 63 basic instructions with illegal opcode detection 17 main addressing modes 8 x 8 unsigned multiply instruction
- I/O Ports13 multifunctional bidirectional I/O lines9 alternate function lines6 high sink outputs
产品规格
| Description | Version | Size |
|---|---|---|
| DS3236: 8-bit microcontroller with single voltage Flash memory, data EEPROM, ADC, timers, SPI | 6.2 | 1 MB |
应用手册
Technical Notes & Articles
| Description | Version | Size |
|---|---|---|
| TN1163: Description of WLCSP for microcontrollers and recommendations for its use | 4.0 | 1 MB |
用户手册
| Description | Version | Size |
|---|---|---|
| UM0015: ST7 8-bit MCU family user guide | 1.4 | 2 MB |
| UM0402: Single-phase multi tariff energy meter | 1.3 | 587 KB |
编程手册
| Description | Version | Size |
|---|---|---|
| PM0018: ST7 Flash programming quick reference guide | 6.4 | 152 KB |
| PM0011: ST7 family Flash programming reference manual | 2.4 | 747 KB |
| PM0012: ST7 family ICC protocol reference manual | 3.3 | 892 KB |
| PM0002: ST7 family programming manual | 2.4 | 1 MB |
Device Option Lists
| Description | Version | Size |
|---|---|---|
| ST7LITE0/ST7SUPERLITE FASTROM option list | 1.0 | 1 KB |
Training Material
| Description | Version | Size |
|---|---|---|
| ST7 Training Part 1 : Introduction | 1.0 | 4 MB |
| ST7 Training Part 2 : Core | 1.0 | 1 MB |
| ST7 Training Part 3 : Addressing Modes | 1.0 | 524 KB |
| ST7 Training Part 4 : Assembly Toolchain | 1.0 | 273 KB |
| ST7 Training Part 5 : Debugger | 1.0 | 571 KB |
| ST7 Training Part 6 : Hardware Tools | 1.0 | 6 MB |
| ST7 Training Part 7 : Peripherals | 1.0 | 1 MB |
| ST7 Training Part 8 : Realizer | 1.0 | 212 KB |
| ST7 Training Part 9 : Cosmic Compiler | 1.0 | 1 MB |
Board Manufacturing Specifications
| Description | Version | Size |
|---|---|---|
| Gerber files for PIR PCB (AN1828) | 1.0 | 29 KB |
Product Certifications
| Description | Version | Size |
|---|---|---|
| ST72F324B Qualification Certificate | 1.0 | 25 KB |
Hardware Development Tools
| 型号 | 制造商 | Description |
|---|---|---|
| AS/Stice_Connect | ST | Adapter Socket for application board - to use with STICE-SYS00x emulation systems |
| INDART | SMH Technologies | In-circuit debugging and in-circuit programming tools for microcontrollers |
| ST7-EMU3 | ST | 3rd generation high-end emulation tool ST7-EMU3 |
| ST7-SocketBoard | ST | Programming socket board |
| STX-RLINK | Raisonance | In-circuit debugger/programmer for STM8, ST7, STM32, STR7 and STR9 microcontrollers |
Software Development Tools
| 型号 | 制造商 | Description |
|---|---|---|
| RIDE-STR | Raisonance | Raisonance branded integrated development environment for ST7, STR7 and STR9 MCUs |
| STSW-ST7009 | ST | DFU Development Kit package (Device Firmware Upgrade).Contains all sources for the GUI and the DFU protocol layer. |
| STVD-ST7 | ST | ST Visual IDE for developing ST7 applications |
| STVP-LIB-ST7 | ST | STVP programming toolkit: C++ source files for creating PC programming interface |
| STVP-ST7 | ST | ST Visual Programmer ST7 |
MCUs Embedded Software
| 型号 | 制造商 | Description |
|---|---|---|
| STSW-ST7020 | ST | HDFlash IAP C-Driver Compatible with Metrowerks and Cosmic compilers. |
| STSW-ST7025 | ST | ST7 USB Low Speed EvalKit Firmware |
| STSW-ST7029 | ST | ST7 XFLASH IAP example with the ST7FOPTIONS-EVAL board |
| STSW-ST7030 | ST | XFlash IAP C-Driver Compatible with Metrowerks and Cosmic compilers. |
| STSW-ST7031 | ST | S/W Implementation of I2C Bus master |
| STSW-ST7032 | ST | Checksum self checking capability |
| STSW-ST7033 | ST | ST72141 BLDC motor control software and flowchart example |
| STSW-ST7034 | ST | Translating assembly code from HC05 to ST7 |
| STSW-ST7035 | ST | Handling suspend mode on a USB mouse |
| STSW-ST7038 | ST | Workaround to ISP mode limitation on the ST7MDT1-DVP2 and ST7MDT2-DVP2 |
| STSW-ST7041 | ST | ST7MC Three-Phase AC Induction Motor Ccontrol Software Library |
| STSW-ST7046 | ST | Ekey-Udisk solution |
| STSW-ST7058 | ST | ST Visual Develop (STVD 3.3.2), core debugger source files |
| STSW-ST7060 | ST | Half Duplex USB-to-Serial bridge using the ST72611 USB microcontroller |
| STSW-ST7061 | ST | LIN (Local Interconnect Network) Solutions |
| STSW-ST7062 | ST | Emulated data EEPROM with ST7 HDFlash memory |
| STSW-ST7066 | ST | ST7 Software Library |
| STSW-ST7079 | ST | ST7 HDFLASH IAP example with the ST7MDT2-TRAIN board |
| STSW-ST7085 | ST | ST7 math utility routines |
| STSW-ST7086 | ST | ST7 routine for I2C slave mode management |
| STSW-ST7087 | ST | ST7 UART emulation software |
| STSW-ST7088 | ST | ST7 Software LCD driver |
| STSW-ST7089 | ST | ST7 timer PWM duty cycle switch for true 0% or 100% duty cycle |
| STSW-ST7090 | ST | ST7 pCAN Peripheral Driver |
| STSW-ST7091 | ST | Software Techniques for compensating ST7 ADC Errors |
| STSW-ST7092 | ST | Generating a high resolution sinewave using ST7 PWMART |
| STSW-ST7093 | ST | SMBus Slave Driver for ST7 I2C Peripherals |
| STSW-ST7094 | ST | Software UART using ST7 12-Bit Autoreload Timer |
| STSW-ST7096 | ST | SCI communication between ST7 and PC |
| STSW-ST7097 | ST | SPI Communication between ST7 and EEPROM |
| STSW-ST7098 | ST | I2C Communication between ST7 and M24Cxx EEPROM |
| STSW-ST7099 | ST | ST7 software SPI master communication |
| STSW-ST7100 | ST | Real time clock with ST7 timer output compare |
| STSW-ST7101 | ST | ST7 - Driving an analog keyboard with the ST7 ADC |
Product Evaluation Tools
| 型号 | 制造商 | Description |
|---|---|---|
| ST7-SK/RAIS | STMicroelectronics;Raisonance | Raisonance REva starter kit for ST7 MCUs, includes RLink |
样片和购买
| 型号 | Quantity | Unit Price (US$) * | Package | Packing Type | Operating Temperature (°C) (min) | Operating Temperature (°C) (max) | ECCN (EU) | ECCN (US) | Country of Origin |
|---|---|---|---|---|---|---|---|---|---|
| ST7FLITES5Y0B6 | - | - | PDIP 16 | Tube | -40 | 85 | NEC | EAR99 | MALAYSIA |
| ST7FLITES5Y0M6 | - | - | SO-16 | Tube | -40 | 85 | NEC | EAR99 | MALAYSIA |
质量和可靠性
| 型号 | Package | Grade | RoHS Compliance Grade | Material Declaration** |
|---|---|---|---|---|
| ST7FLITES5Y0B6 | PDIP 16 | Industrial | Ecopack1 | |
| ST7FLITES5Y0M6 | SO-16 | Industrial | Ecopack2 |
- circuit_diagram_8348_thumbnail.png ST7LITE02Y0
- A High Precision, Low Cost, Single Supply ADC for Positive and Negative Input Voltages ST72264G1
- A High Resolution/Precision thermometer using ST7 and NE555 ST72264G1
- A flexible universal battery charger ST72264G1
- Accurate timebase for low-cost ST7 applications with internal RC oscillator ST72264G1
- An MCU-based low cost non-inverting buck-boost converter for battery chargers ST72264G1
- DIFFERENT WAYS TO RESET ST7 MICROCONTROLLER ST72264G1
- Data logging program for testing ST7 applications via ICC ST72264G1
- Device firmware upgrade (DFU) implementation in ST7 USB devices ST72264G1
- Device firmware upgrade (DFU) implementation in non-USB applications ST72264G1
- Driving a buzzer through ST7 timer PWM function ST72264G1
- Driving an analog keyboard with the ST7 ADC ST72264G1
- EMC design guide for ST microcontrollers STM8L101G3
- Ekey-Udisk solution STSW-ST7046
- Electrostatic discharge sensitivity measurement STM8L101G3
- Emulated data EEPROM with ST7 HDFlash memory ST72264G1
- Emulated data EEPROM with XFlash memory ST72264G1
- Executing code in ST7 RAM ST72264G1
- Field updates for Flash based ST7 applications using a PC COMM port ST72264G1
- GENERATING A HIGH RESOLUTION SINEWAVE USING ST7 PWMART ST72264G1
- Guidelines for migrating ST72F324 & ST72F321 applications to ST72F324B, ST72F321B or ST72F325 ST72264G1
- Guidelines for migrating ST7LITE1x applications to ST7FLITE1xB ST72264G1
- Handling suspend mode on a USB mouse ST72264G1
- How to minimize the ST7 power consumption ST72264G1
- I2C communication between ST7 and M24CXX EEPROM STSW-ST7098
- In-Application Programming (IAP) drivers for ST7 HDFlash or XFlash MCUs ST72264G1
- LIN (Local Interconnect Network) solutions ST72264G1
- Managing reception errors with the ST7 SCI peripheral ST72264G1
- Monitoring the VBUS signal for USB self-powered devices ST72264G1
- Multiple interrupt sources management for ST7 MCUs ST72264G1
- On-board programming methods for XFlash and HDFlash ST7 MCUs ST72264G1
- Overview of enhanced CAN controllers for ST7 and ST9 MCUs ST92F150CV1
- PMBus™ interface using ST7 I²C STSW-ST7095
- Programming ST7 Flash microcontrollers in remote ISP mode (In-Situ Programming) ST72264G1
- Real time clock with ST7 Timer Output Compare ST72264G1
- SCI communication between ST7 and PC ST72264G1
- SMBus slave driver for ST7 I2C peripheral ST72264G1
- SOFTWARE TECHNIQUES FOR COMPENSATING ST7 ADC ERRORS ST72264G1
- SPI communication between ST7 and EEPROM ST72264G1
- ST7 10-bit A/D converter non-linearity at center of range ST72264G1
- ST7 Benefits versus Industry Standard ST72264G1
- ST7 Checksum self-checking capability ST72264G1
- ST7 S/W implementation of I2C bus master ST72264G1
- ST7 Software SPI master communication ST72264G1
- ST7 UART emulation software ST72264G1
- ST7 and ST9 performance benchmarking ST92F150CV1
- ST7 customer ROM code release information ST72264G1
- ST7 keypad decoding techniques, implementing wake-up on keystroke ST72264G1
- ST7 math utility routines ST72264G1
- ST7 pCAN peripheral driver STSW-ST7090
- ST7 routine for I2C slave mode management ST72264G1
- ST7 serial test controller programming ST72264G1
- ST7 software LCD driver ST72264G1
- ST7 timer PWM duty cycle switch for true 0% or 100% duty cycle ST72264G1
- ST7/ST10/U435 CAN-do solutions for car multiplexing ST72264G1
- Selecting between ROM, FASTROM and Flash for a microcontroller ST92F150CV1
- Selecting between ROM, FASTROM and OTP for a microcontroller STR910FAW32
- Starting a PWM signal directly at high level using the ST7 16-bit timer ST7-EMU3
- Temperature sensor application using ST LM135 STSW-ST7047
- Translating assembly code from HC05 to ST7 STSW-ST7034
- Understanding and minimising ADC conversion errors ST72264G1
- Using ST7 PWM signal to generate analog output (sinusoïd) ST72264G1
- Using ceramic resonators with the ST7 ST72264G1
- Using the ST7 SPI to emulate a 16-bit slave ST72264G1
- Using the ST7 USB device firmware upgrade development kit (DFU-DK) ST72264G1
- Using the ST7 USB low-speed library V4.2x ST72264G1
- Using the ST7 Universal Serial Bus microncontroller ST72264G1
- Using the indirect addressing mode with ST7 ST72264G1
- Description of WLCSP for microcontrollers and recommendations for its use STM8L101G3
- ST7 8-bit MCU family user guide ST72264G1
- Single-phase multi tariff energy meter ST72264G1
- ST7 Flash programming quick reference guide ST72264G1
- ST7 family Flash programming reference manual ST72264G1
- ST7 family ICC protocol reference manual ST72264G1
- ST7 family programming manual ST72264G1
- ST7 family programming manual ST7LITE02Y0
- ST7 family programming manual ST72264G1
- ST7 family programming manual ST72264G1
- ST7 family programming manual ST72264G1
- ST7 family programming manual ST72264G1
- ST7 family programming manual ST72264G1
- ST7 family programming manual ST72264G1
- ST7 family programming manual ST72264G1
- ST7 family programming manual ST72264G1
- ST7 family programming manual ST72264G1
- ST7 family programming manual ST72264G1
- ST7 family programming manual ST72264G1
