• 简体中文
• English

ST8024：Smartcard interface

The ST8024 is a complete low cost analog interface for asynchronous 3 V and 5 V smart cards. It can be placed between the card and the microcontroller with few external components to perform all supply protection and control functions. ST8024 is a direct replacement of ST8004.

Main applications are: smartcard readers for settop- box, IC card readers for banking, identification, pay TV.

Key Features

• 26 MHz integrated crystal oscillator
• Enhanced ESD protection on card side (> 6 kV)
• Non-inverted control of RST via pin RSTIN
• Clock generation for cards up to 20 MHz (divided by 1, 2, 4 or 8 through CLKDIV1 and CLKDIV2 signals) with synchronous frequency changes
• Supply supervisor for spike-killing during power-on and power-off and power-on reset (threshold fixed internally or externally by a resistor bridge)
• ISO 7816, GSM11.11 and EMV (payment systems) compatibility
• One multiplexed status signal off
• Built-in debounce on card presence contacts
• Thermal and short-circuit protection on all card contacts
• 3 or 5 V ± 5 % regulated card supply voltage (VCC ) with appropriate decoupling has the following capabilities:Icc < 80 mA at VDD P = 4 to 6.5 VHandles current spikes of 40 nA up to 20 MHzControls rise and fall timesFiltered overload detection at approximately 120 mA
• Designed to be compatible with the NDS conditional access system
• 3 or 5 V supply for the IC (VDD and GND)
• IC card interface
• DC-DC converter for VCC generation separately powered from a 5 V ± 20% supply (VDD P and PGND)
• Automatic activation and deactivation sequences; initiated by software or by hardware in the event of a short-circuit, card take-off, overheating, VDD or VDDP drop-out
• Three specifically protected half-duplex bidirectional buffered I/O lines to card contacts C4, C7 and C8

产品规格

应用手册

样片和购买

质量和可靠性