• 简体中文
• English

STEVAL-LNBH01：Power supply evaluation board for LNB based on the LNBH25LS

This evaluation board implements a DC-DC converter based on the LNBH25LS device. It is used to power LNBs inside dish antennas to receive satellite TV signals.

The LNBH25LS is an integrated solution for supplying / interfacing satellite LNB modules in accordance with international standards. This simple solution offers a complete solution for dual tuner satellite receivers and offers high performance at low cost with a low external component count.

The LNBH25LS evaluation board includes an I²C bus interface and the internal 22 kHz tone generator which is factory trimmed and can be controlled by the DSQIN pin (TTL compatible), allowing immediate DiSEqC™ data encoding.

Thanks to a fully integrated step-up DC-DC converter, it functions with a single input voltage supply source ranging from 8 V to 16 V.

Key Features

• Complete interface between LNB and I²C bus
• Built-in DC-DC converter for single 12 V supply operation and high efficiency (typ. 93% at 0.5 A)
• Selectable output current limit by external resistor
• Compliant with output voltage specifications for principal satellite receivers (15 programmable levels)
• Accurate built-in 22 kHz tone generator suits widely accepted standards
• 22 kHz tone waveform integrity guaranteed even at no load condition
• Low drop post regulator and high efficiency step-up PWM with integrated power N-MOS for low power losses
• LPM function (low power mode) to reduce dissipation
• Overload and overtemperature internal protection with I²C diagnostic bits
• LNB short-circuit dynamic protection
• ±4 kV ESD tolerant on output power pins
• RoHS compliant

产品规格

Board Manufacturing Specifications

Bill of Materials

Schematic Packs

许可协议

Evaluation Tool Software

样片和购买

质量和可靠性