• 简体中文
• English

STUSBCD01B：USB charger detection interface

The STUSBCD01B is a USB charger detection IC which can detect dedicated USB chargers, Host/Hub chargers or standard host ports connected to the USB DP/DM data lines.

The device implements two different detection methods in order to be able to distinguish between a dedicated charger and a Host/Hub charger.

Operation is controlled through three general purpose I/O pins; a hardware open drain detection output is also available.

An internal regulator provides the 1.8 V supply voltage for the internal blocks and state machine while a clamping device prevents V_BUS voltage from going over 6 V (typ.).

The STUSBCD01B is available in a 12 bumps Flip-Chip 0.4 mm pitch package.

Key Features

• Low DP-DM input capacitance
• VBUS voltage 6 V clamping circuit
• 12 bumps Flip-Chip package, 1.6 x1.2 mm, pitch 0.4 mm, max thickness 0.60 mm, Halogen free RoHS compliant package
• Capable of detecting dedicated USB chargers and host chargers (current sink and dedicated methods)
• Active high open drain hardware detection pin (DETECT)
• Operates with VBAT supply voltage ranging from 2.2 V to 4.5 V
• 1.6 V - 2.8 V interface voltage range (VIO )
• ESD: HBM ± 2 kV, CDM 500 V on every pin
• GPIO control interface

产品规格

应用手册

样片和购买

质量和可靠性