VNH5180A-E:Automotive fully integrated H-bridge motor driver

The VNH5180A-E is a full bridge motor driver intended for a wide range of automotive applications. The device incorporates a dual monolithic high-side driver and two low-side switches. Both switches are designed using STMicroelectronics’ well known and proven proprietary VIPower®M0 technology that allows to efficiently integrate on the same die a true Power MOSFET with an intelligent signal/protection circuitry. The three dies are assembled in PowerSSO-36 TP package on electrically isolated leadframes. This package, specifically designed for the harsh automotive environment offers improved thermal performance thanks to exposed die pads. Moreover, its fully symmetrical mechanical design allows superior manufacturability at board level. The input signals INAand INBcan directly interface to the microcontroller to select the motor direction and the brake condition. The DIAGA/ENAor DIAGB/ENB, when connected to an external pull-up resistor, enables one leg of the bridge. Each DIAGA/ENAprovides a feedback digital diagnostic signal as well. The normal operating condition is explained in the truth table. The CS pin allows to monitor the motor current by delivering a current proportional to its value when CS_DIS pin is driven low or left open. When CS_DIS is driven high, CS pin is in high impedance condition. The PWM, up to 20 KHz, allows to control the speed of the motor in all possible conditions. In all cases, a low level state on the PWM pin turns off both the LSAand LSBswitches.

Key Features

  • Output current: 8 A
  • 3 V CMOS compatible inputs
  • Undervoltage shutdown
  • Overvoltage clamp
  • Thermal shutdown
  • Cross-conduction protection
  • Current and power limitation
  • Very low standby power consumption
  • PWM operation up to 20 KHz
  • Protection against loss of ground and loss of VCC
  • Current sense output proportional to motor current
  • Output protected against short to ground and short to VCC
  • Package: ECOPACK®
产品规格
DescriptionVersionSize
DS6703: Automotive fully integrated H-bridge motor driver6.0480 KB
应用手册
DescriptionVersionSize
AN4892: VIPower M0-5 H-bridges - hardware design guide2.02 MB
HW Model & CAD Libraries
DescriptionVersionSize
VNH5180A-E OrCAD model5.152 KB
简报
DescriptionVersionSize
Integrated H-bridge motor control1.01 MB
宣传册
DescriptionVersionSize
VIPower™ VNH5 series1.01 MB
选型指南
DescriptionVersionSize
Smart power solutions for car body applications3.01 MB
Evaluation Tool Software
型号制造商Description
TwisterSIMSTDynamic Electro-Thermal simulator for devices in VIPower technology
Product Evaluation Tools
型号制造商Description
STEVAL-VNH5180AVNH5180A Evaluation Board
样片和购买
型号PackagePacking TypeOperating Temperature (°C) (min)Operating Temperature (°C) (max)Unit Price (US$) *QuantityECCN (EU)ECCN (US)Country of Origin
VNH5180ATR-EPSSO 36Tape And Reel--1.8461000NECEAR99MALAYSIA
VNH5180A-EPSSO 36Tube--1.8461000NECEAR99MALAYSIA
质量和可靠性
型号PackageGradeRoHS Compliance GradeMaterial Declaration**
VNH5180ATR-EPSSO 36AutomotiveEcopack2ipc-wspc-1752a_arg(-vh03dby_signed.pdf
VNH5180A-EPSSO 36AutomotiveEcopack2ipc-wspc-1752a_arg(-vh03dby_signed.pdf
Automotive fully integrated H-bridge motor driver VNH5180A-E
circuit_diagram_17074_thumbnail.png VNH5180A-E
VIPower M0-5 H-bridges - hardware design guide VN5770AKP-E
VIPower M0-5 H-bridges - hardware design guide VNH5180A-E
VIPower M0-5 H-bridges - hardware design guide VNH5200AS-E
VIPower M0-5 H-bridges - hardware design guide VNH5200AS-E
Door actuator driver L9950XP
ipc-wspc-1752a_arg(-vh03dby_signed.pdf VNH5180A-E