X-CUBE-32F7PERF:STM32F7 performance software expansion for STM32Cube (AN4667)

This firmware, called X-CUBE-32F7PERF, aims to demonstrate the performance of the STM32F7 Series architecture (see figure on the right), including the Cortex® -M7, the CPU caches (instruction and data caches) and its memory interfaces.

The ST ART Acceleratoris provided to unleash the Cortex® -M7 core performance and to allow 0-wait-state-like execution from the Flash memory at the CPU frequency up to 216 MHz.

The Bus Matrix and the AXI-to-AHB bridge, running at the same CPU frequency, interconnect the core, the masters and the slaves, minimizing the latency.

The firmware is provided with two projects for each available EVAL-Board: stm32f7_performances and stm32f7_performances_DMAs.

The first project comes with several sub-project configurations. Each of them allows the execution of the application code and the data storage in different memory locations, that is, internal memories as well as external memories.

In the case of the stm32f7_performances project, there are different combinations of enabling or disabling for I-Cache, D-Cache and ST ART Accelerator™ in each subproject configuration.

The different combinations present in the project are there to show in which case the user should enable/disable the I-Cache, the D-Cache and the ST ART Accelerator™.

The memory location, internal or external, does not impact the performance. The proposed use case is the FFT (fast Fourier transform) example, provided in the CMSIS library.

The second project comes with three subproject configurations. They are based on the same skeleton than the first project as well as in the FFT computation and they give the possibility to activate some DMA (direct memory access) transfers, to evaluate the STM32F7 Series architecture performances in several scenarios.

The two examples are provided with Keil®MDK-ARMtoolchain and can easily be ported to any other toolchain.

For more details refer to the STM32F7 Series system architecture and performance application note (AN4667).

Key Features

  • STM32F7 performance
  • Code execution and data storage in different memory locations
  • Instruction Cache (I-Cache)
  • Data Cache (D-Cache)
  • ST ART Accelerator™ performances in multi-master configuration
产品规格
DescriptionVersionSize
DB2616: STM32F7 performance software expansion for STM32Cube3.0145 KB
应用手册
DescriptionVersionSize
AN4667: STM32F7 系列系统架构和性能3.0676 KB
手册
DescriptionVersionSize
STM32 Open Development Environment Brochure15.104 MB
STM32F7 series - ARM® Cortex®-M7 powered16.092 MB
许可协议
DescriptionVersionSize
SLA0048: Mix Liberty + OSS + 3rd- party V1 - SOFTWARE LICENSE AGREEMENT2.18112 KB
MCUs Embedded Software
型号制造商Description
STM32CubeF7STEmbedded software for STM32F7 series (HAL low level drivers, USB, TCP/IP, File system, RTOS, Graphic - coming with examples running on ST boards: STM32 Nucleo, Discovery kits and Evaluation boards)
获取软件
型号Software VersionSupplier
X-CUBE-32F7PERF3.0.0ST
STM32F7 performance software expansion for STM32Cube X-CUBE-32F7PERF
STM32F7 系列系统架构和性能 X-CUBE-32F7PERF
Getting started with X-CUBE-SPN6, low voltage stepper motor driver software expansion for STM32Cube X-CUBE-SPN6
STM32CubeF7 demonstration platform STM32CUBEF7
Mix Liberty + OSS + 3rd- party V1 - SOFTWARE LICENSE AGREEMENT STSW-STM32019