AP3607：LED Drivers for Displays / Backlights
| Part Number | Data Sheet | SPICE Model | Function | MinimumInput Voltage (V) | MaximumInput Voltage (V) | Maximum Output Voltage (V) | Number of Regulated Output Channels | Maximum Output Current per Channel (mA) | Typical Over-Current Protection Current (mA) | Switching Frequency (MHz) | Efficiency (%) | Quiescent Current (mA) | Standby Quiescent Current (µA) | SW RDS(ON) (Ω) | Dimming | OVP | Soft Start | VFB (V) | OperatingTemperatureRange (°C) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AP3607 | AP3606_07.pdf | - | Charge Pump LED Driver | 2.7 | 5.5 | 5.5 | 6 | 20 | - | 1 | 89 | 1.7 | 3 | - | Digital PWM | Yes | Yes | - | -40 to +85 |
Description
The AP3606 and AP3607 are step-up DC-DC converters based on 1x/1.5x charge pump and low dropout current sink, which helps them maintain the highest efficiency. The AP3606 is specially designed to drive up to 4 W°Cs in backlight display while the AP3607 is designed for 6 W°Cs. These devices provide up to 20mA current for each W°C. There are totally 16 steps of current control, which is achieved through a digital pulse dimming function on EN pin. Additionally, 1MHz high switching frequency enables the use of small external capacitors. Internal soft-start circuitry prevents excessive inrush current during start-up and mode transition. The supply voltage ranges of AP3606 and AP3607 are from 2.7V to 5.5V which make them ideally suit for applications powered by Li-ion battery. These ICs are available in the tiny package of QFN-3Ω3-16.
Application
- Mobile Phone
- PDA
- MP3/4
U-QFN3030-16
- AP3606_07.pdf AP3607
