AP8800：Medium Voltage DC-DC LED Drivers _ BDTIC a Leading Distributor in China

AP8800：Medium Voltage DC-DC LED Drivers

Part Number	Data Sheet	SPICE Model	Qualified to AECQ10x	PPAP Capable	Topologies (Buck)	Topologies (Buck-Boost)	Topologies (Boost)	MinimumInput Voltage (V)	MaximumInput Voltage (V)	Maximum Output Voltage (V)	Maximum LED Current (A)	LED Current Accuracy (%)	Switching Frequency Maximum (kHz)	Dimming (PWM)	Dimming (Analog)	Efficiency (%)	OperatingTemperatureRange (°C)	Sense Voltage (mV)	AEC-Q100 Grade
AP8800	AP8800.pdf	-	-	-	Yes	-	-	8	28	28	0.35	7	700	Yes	Yes	92	-40 to +85	100	-

Description

The AP8800 is a step-down DC/DC converter designed to drive °Cs with a constant current. The device can drive up to seven °Cs, depending on the forward voltage of the °Cs, in series from a voltage source of 8V to 28V. Series connection of the °Cs provides identical °C currents resulting in uniform brightness and eliminates the need for ballast resistors. The AP8800 switches at frequency up to 0.6MHz. This allows the use of small size external components, hence minimizing the PCB area needed. Maximum output current of AP8800 is set via an external resistor connected between the VIN and SET input pins. Dimming is achieved by applying either a DC voltage or a PWM signal at the CTRL input pin. An input voltage of 0.2V or lower at CTRL shuts down the output at SW and puts the device into a low-current standby state.

Application

Commercial & Industrial lighting
Small LCD panel backlight
Architecture Detail lighting
Appliances interior lighting

Features

°C driving current up to 350mA
Compatible with 12V & 24V standard systems
High efficiency up to 92%
High switching frequency up to 0.6MHz
PWM/DC input for dimming control
Built-in soft-start function
Built-in output open-circuit protection
SO-8, MSOP-8L and DFN3030-10 are available in “Green” Molding Compound (No Br, Sb)
Lead Free Finish/RoHS Compliant