AP8803：Medium Voltage DC-DC LED Drivers
| Part Number | Data Sheet | SPICE Model | Qualified to AECQ10x | PPAP Capable | Topologies (Buck) | Topologies (Buck-Boost) | Topologies (Boost) | MinimumInput Voltage (V) | MaximumInput Voltage (V) | Maximum Output Voltage (V) | Maximum LED Current (A) | LED Current Accuracy (%) | Switching Frequency Maximum (kHz) | Dimming (PWM) | Dimming (Analog) | Efficiency (%) | OperatingTemperatureRange (°C) | Sense Voltage (mV) | AEC-Q100 Grade |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AP8803 | AP8803.pdf | AP8803 | - | - | Yes | - | - | 8 | 30 | 30 | 1 | 8 | 700 | Yes | Yes | 92 | -40 to +125 | 100 | - |
Description
The AP8803 is a step-down DC/DC converter designed to drive °Cs with a constant current. The device can drive up to 7 °Cs, depending on the forward voltage of the °Cs, in series from a voltage source of 8V to 30V. Series connection of the °Cs provides identical °C currents resulting in uniform brightness and eliminating the need for ballast resistors. The AP8803 switches at frequency up to 700kHz. This allows the use of small size external components, hence minimizing the PCB area needed. Maximum output current of AP8803 is set via an external resistor connected between the VIN and SET input pins. Dimming is achieved by applying either a DC voltage or a PWM signal at the CTRL input pin. An input voltage of 0.2V or lower at CTRL shuts down the output at SW and puts the device into a low-current standby state.
Features
- °C driving current up to 1A
- High efficiency up to 92%
- Operating input voltage up to 30V
- High switching frequency up to 700kHz
- PWM/DC input for dimming control
- Built-in output open-circuit protection
- TSOT25 is available in “Green” Mold Compound
Ordering Information
- AP8803EV1
- AP8803WTG-7
TSOT25
- AP8803.pdf AP8803
