DC2089A-A - LTC3880EUJ/LTC3870EUFD RSENSE Demo Board | 7V ≤ VIN ≤ 14V; VOUT = 0.8V to 1.8V @ 80A
Demonstration circuit 2089A is a high current, high efficiency, poly-phase synchronous buck converter featuring the LTC®3880EUJ, a dual-phase current mode controller, and the LTC3870EUFD, a dual-phase slave controller. The LTC3880 has the PMBus interface and power system management functions.
The input range of this board is from 7V to 14V, and the output voltage can be programmed from 0.8V to 1.8V. The output current is up to 80A for 4-phase operation. The DC2089A has two versions, the DC2089A-A uses a current sense resistor, while the DC2089A–B has DCR current sensing. The factory default setting for the output voltage is 1.0V.
You can use a PC to reconfigure the power management features of the LTC3880 such as: nominal VOUT, margin set points, OV/UV limits, temperature fault limits, sequencing parameters, the fault log, fault responses, GPIO and other functionality.
DC1613A - USB-to-PMBus Controller for Use with LTpowerPlay
Demo Board Design File
Demo Board Manual
Demo Board Schematic
Products
- DC2089A - Design Files
- LTC3870 - PolyPhase Step-Down Slave Controller for Digital Power System Management
- LTC3880 - Dual Output PolyPhase Step-Down DC/DC Controller with Digital Power System Management
Related Solutions
- Digital Power: Why Should I Care About Accuracy?
- What Is Digital Power System Management?
- LTC3887 High Efficiency Quad 500kHz 1.2V Step-Down Converter with PMBus
- Digital Point of Load Converters vs. Digital Managers
- Fault Management Architecture
- LTC3870 PolyPhase Step-Down Slave Controller for LTC Digital Power System Management Master Controllers - Video Product Brief
- Altera Arria V GX Starter Kit
- High Performance Single Phase DC/DC Controller with Power System Management
- Guide To Ordering LTC's Custom-Programmed EEPROM Devices
- Linduino PSM
