LT4363 - High Voltage Surge Stopper with Current Limit

The LT®4363 surge stopper protects loads from high voltage transients. It regulates the output during an overvoltage event, such as load dump in vehicles, by controlling the gate of an external N-channel MOSFET. The output is limited to a safe value allowing the loads to continue functioning. The LT4363 also monitors the voltage drop between the SNS and OUT pins to protect against overcurrent faults. An internal amplifier limits the voltage across the current sense resistor to 50mV. In either fault condition, a timer is started inversely proportional to MOSFET stress. Before the timer expires, the FLT pin pulls low to warn of an impending power down. If the condition persists, the MOSFET is turned off. The LT4363-1 remains off until reset whereas the LT4363-2 restarts after a cool down period.

Two precision comparators can monitor the input supply for overvoltage (OV) and undervoltage (UV) conditions. When the potential is below the UV threshold, the external MOSFET is kept off. If the input supply voltage is above the OV threshold, the MOSFET is not allowed to turn back on. Back-to-back MOSFETs can be used in lieu of a Schottky diode for reverse input protection, reducing voltage drop and power loss. A shutdown pin reduces the quiescent current to less than 7μA during shutdown.

Features
  • Withstands Surges Over 80V with VCC Clamp
  • Wide Operating Voltage Range: 4V to 80V
  • Adjustable Output Clamp Voltage
  • Fast Overcurrent Limit: Less Than 5μs
  • Reverse Input Protection to –60V
  • Adjustable UV/OV Comparator Thresholds
  • Low 7μA Shutdown Current
  • Shutdown Pin Withstands –60V to 100V
  • Adjustable Fault Timer
  • Controls N-Channel MOSFET
  • Less Than 1% Retry Duty Cycle During Faults, LT4363-2
  • Available in 12-Pin (4mm × 3mm) DFN, 12-Pin MSOP or 16-Pin SO Packages
Typical Application
LT4363 Typical Application
LT4363 Typical Application
Applications
  • Automotive/Avionic Surge Protection
  • Hot Swap™/Live Insertion
  • High Side Switch for Battery Powered Systems
  • Intrinsic Safety Applications
Packaging
LT4363 Package Drawing
LT4363 Package Drawing
LT4363 Package Drawing
LT4363 Package Drawing
LT4363 Package Drawing
LT4363 Package Drawing
Order Information
Part NumberPackageTempPrice(1-99)Price (1k)*
LT4363CDE-1#PBF4x3 DFN-12C$3.54$2.48
LT4363CDE-1#TRPBF4x3 DFN-12C$2.54
LT4363CDE-2#PBF4x3 DFN-12C$3.54$2.48
LT4363CDE-2#TRPBF4x3 DFN-12C$2.54
LT4363CMS-1#PBFMS-12C$3.54$2.48
LT4363CMS-1#TRPBFMS-12C$2.54
LT4363CMS-2#PBFMS-12C$3.54$2.48
LT4363CMS-2#TRPBFMS-12C$2.54
LT4363CS-1#PBFSO-16C$3.54$2.48
LT4363CS-1#TRPBFSO-16C$2.54
LT4363CS-2#PBFSO-16C$3.54$2.48
LT4363CS-2#TRPBFSO-16C$2.54
LT4363HDE-1#PBF4x3 DFN-12H$4.49$3.14
LT4363HDE-1#TRPBF4x3 DFN-12H$3.20
LT4363HDE-2#PBF4x3 DFN-12H$4.49$3.14
LT4363HDE-2#TRPBF4x3 DFN-12H$3.20
LT4363HMS-1#PBFMS-12H$4.49$3.14
LT4363HMS-1#TRPBFMS-12H$3.20
LT4363HMS-2#PBFMS-12H$4.49$3.14
LT4363HMS-2#TRPBFMS-12H$3.20
LT4363HS-1#PBFSO-16H$4.49$3.14
LT4363HS-1#TRPBFSO-16H$3.20
LT4363HS-2#PBFSO-16H$4.49$3.14
LT4363HS-2#TRPBFSO-16H$3.20
LT4363IDE-1#PBF4x3 DFN-12I$4.07$2.85
LT4363IDE-1#TRPBF4x3 DFN-12I$2.91
LT4363IDE-2#PBF4x3 DFN-12I$4.07$2.85
LT4363IDE-2#TRPBF4x3 DFN-12I$2.91
LT4363IMS-1#PBFMS-12I$4.07$2.85
LT4363IMS-1#TRPBFMS-12I$2.91
LT4363IMS-2#PBFMS-12I$4.07$2.85
LT4363IMS-2#TRPBFMS-12I$2.91
LT4363IS-1#PBFSO-16I$4.07$2.85
LT4363IS-1#TRPBFSO-16I$2.91
LT4363IS-2#PBFSO-16I$4.07$2.85
LT4363IS-2#TRPBFSO-16I$2.91
LT4363MPMS-1#PBFMS-12MP$10.63$7.44
LT4363MPMS-1#TRPBFMS-12MP$7.50
LT4363MPMS-2#PBFMS-12MP$10.63$7.44
LT4363MPMS-2#TRPBFMS-12MP$7.50
LT4363MPS-1#PBFSO-16MP$10.63$7.44
LT4363MPS-1#TRPBFSO-16MP$7.50
LT4363MPS-2#PBFSO-16MP$10.63$7.44
LT4363MPS-2#TRPBFSO-16MP$7.50
Demo Boards
Part NumberDescriptionPrice
DC1935A-ALT4363-1 Demo Board: High Voltage Surge Stopper with Current Limit, Latch-Off Version$75.00
DC1935A-BLT4363-2 Demo Board: High Voltage Surge Stopper with Current Limit, Auto-Retry Version$75.00
DC2062A-ALT4363IDE-1 Demo Board: 12V System ISO-7637-2 Surge Stopper, Latch-Off Version$75.00
DC2062A-BLT4363IDE-2 Demo Board: 12V System ISO-7637-2 Surge Stopper, Auto-Retry Version$75.00
DC2150A-C28V, 5A MIL-STD-1275D Surge Stopper [Featuring LTC4366HTS8-2 and LT4363HS-2]$150.00
Datasheet
Design Note
Reliability Data
Product Selector Card
LT Journal
Press Release
CAD Symbol
LTspice
Related Products
LT4363 - High Voltage Surge Stopper with Current Limit
DN534 - 浪涌抑制器缓解了与 MIL-STD-1275D 标准的相符性要求
高压浪涌抑制器取代笨重的无源组件
高电压浪涌抑制器确保电源可靠操作
具电流限制功能的高压浪涌抑制器可避免敏感电子线路遭受 100V 以上瞬态电压的损坏
易于符合 MIL-STD-1275D 要求的浪涌抑制器解决方案
宽工作电压范围理想二极管控制器提供负输入保护和低电流工作
DN534 - Surge Stoppers Ease MIL-STD-1275D Compliance
R568 - Reliability Data
Surge Stoppers
High Voltage Surge Stoppers Ease MIL-STD-1275D Compliance by Replacing Bulky Passive Components
High Voltage Surge Stopper with Current Limit Shields Sensitive Electronics from Transients Beyond 100V
Surge Stopper Solution Eases MIL-STD-1275D Compliance
Wide Operating Range Ideal Diode Controller Provides Negative Input Protection & Low Current Operation
LT4363 Footprints and Symbols
LT4363-2 Demo Circuit - Overvoltage Regulator with 250V Surge Protection (5.5-250V to 16V Max)