• 简体中文
• English

LTC1392 - Micropower Temperature, Power Supply and Differential Voltage Monitor

The LTC1392 is a micropower data acquisition system designed to measure temperature, on-chip supply voltage and a differential voltage. The differential inputs feature rail-to-rail common mode input voltage range. The LTC1392 contains a temperature sensor, a 10-bit A/D converter with sample-and-hold, a high accuracy bandgap reference and a 3-wire half-duplex serial interface. The LTC1392 can be programmed to measure ambient temperature, power supply voltage and an external voltage at the differential input pins, that can also be used for current measurement using an external sense resistor. When measuring temperature, the output code of the A/D converter is linearly proportional to the temperature in °C. Production trimming achieves +/-2°C initial accuracy at room temperature and +/-4°C over the full -40°C to 85°C temperature range. The on-chip serial port allows efficient data transfer to a wide range of MPUs over three or four wires. This, coupled with low power consumption, makes remote location sensing possible and facilitates transmitting data through isolation barriers.

Features Complete Ambient Temperature Sensor Onboard System Power Supply Monitor 10-Bit Resolution Rail-to-Rail Common-Mode Differential Voltage Input Available in 8-Pin SO and PDIP 0.2µA Supply Current When Idle 700µA Supply Current When Sampling at Maximum Rate Single Supply Voltage: 4.5V to 6V 3-Wire Half-Duplex Serial I/O Communicates with Most MPU Serial Ports and All MPU Parallel I/O Ports Typical Application

Applications Temperature Measurement Power Supply Measurement Current Measurement Remote Data Acquisition Environment Monitoring Packaging