LTC3115-2 - 40V, 2A Synchronous Buck-Boost DC/DC Converter

The LTC®3115-2 is a high voltage monolithic synchronous buck-boost DC/DC converter optimized for applications subject to fast (<1ms) input voltage transients. For all other applications, the LTC3115-1 is recommended. With its wide 2.7V to 40V input and output voltage ranges, the LTC3115-2 is well suited for use in a wide variety of automotive and industrial power supplies. A proprietary low noise switching algorithm optimizes efficiency with input voltages that are above, below or even equal to the output voltage and ensures seamless transitions between operational modes.

Programmable frequency PWM mode operation provides low noise, high efficiency operation and the ability to synchronize switching to an external clock. Switching frequencies up to 2MHz are supported to allow use of small value inductors for miniaturization of the application circuit. Pin selectable Burst Mode operation reduces standby current and improves light load efficiency which, combined with a 3μA shutdown current, make the LTC3115-2 ideally suited for battery-powered applications. Additional features include output disconnect in shutdown, short-circuit protection and internal soft-start. The LTC3115-2 is available in thermally enhanced 16-lead 4mm × 5mm × 0.75mm DFN and 20‑lead TSSOP packages.

Features
  • Wide VIN Range: 2.7V to 40V
  • Wide VOUT Range: 2.7V to 40V
  • 0.8A Output Current for VIN ≥ 3.6V, VOUT = 5V
  • 2A Output Current in Step-Down Operation for VIN ≥ 6V
  • Programmable Frequency: 100kHz to 2MHz
  • Synchronizable Up to 2MHz with an External Clock
  • Up to 95% Efficiency
  • 30μA No-Load Quiescent Current in Burst Mode® Operation
  • Ultralow Noise Buck-Boost PWM
  • Internal Soft-Start
  • 3μA Supply Current in Shutdown
  • Programmable Input Undervoltage Lockout
  • Small 4mm × 5mm × 0.75mm DFN Package
  • Thermally Enhanced 20-Lead TSSOP Package
Typical Application
LTC3115-2 Typical Application
LTC3115-2 Typical Application
Applications
  • 24V/28V Industrial Applications
  • Automotive Power Systems
  • Telecom, Servers and Networking Equipment
  • FireWire Regulator
  • Multiple Power Source Supplies
Packaging
LTC3115-2 Package Drawing
LTC3115-2 Package Drawing
Order Information
Part NumberPackageTempPrice(1-99)Price (1k)*
LTC3115EDHD-2#PBF5x4 DFN-16E$7.64$5.35
LTC3115EDHD-2#TRPBF5x4 DFN-16E$5.41
LTC3115EFE-2#PBFTSSOP-20E$7.93$5.55
LTC3115EFE-2#TRPBFTSSOP-20E$5.61
LTC3115HFE-2#PBFTSSOP-20H$9.09$6.36
LTC3115HFE-2#TRPBFTSSOP-20H$6.42
LTC3115IDHD-2#PBF5x4 DFN-16I$8.42$5.89
LTC3115IDHD-2#TRPBF5x4 DFN-16I$5.95
LTC3115IFE-2#PBFTSSOP-20I$8.73$6.11
LTC3115IFE-2#TRPBFTSSOP-20I$6.17
LTC3115MPFE-2#PBFTSSOP-20MP$23.54$16.48
LTC3115MPFE-2#TRPBFTSSOP-20MP$16.54
Demo Boards
Part NumberDescriptionPrice
DC2119ALTC3115EDHD-2 Demo Board | 2.7V to 40VIN, 5VOUT @ 2A$225.00
Datasheet
Reliability Data
LT Journal
CAD Symbol
Ad
Related Products
LTC3115-2 - 40V, 2A Synchronous Buck-Boost DC/DC Converter
R526 - Reliability Data
2.7V to 40V Monolithic Buck-Boost DC/DC Expands Input Capabilities, Regulates Seamlessly through Automotive Cold-Crank and Load-Dump Transients
LTC3115-2 Footprints and Symbols
2.7V to 40V, 2A, Sync Buck-Boost