LTC3604 - 2.5A, 15V Monolithic Synchronous Step-Down Regulator

The LTC3604 is a high efficiency, monolithic synchronous buck regulator using a phase-lockable controlled on-time, current mode architecture capable of supplying up to 2.5A of output current. The operating supply voltage range is from 3.6V to 15V, making it suitable for a wide range of power supply applications.

The operating frequency is programmable from 800kHz to 4MHz with an external resistor enabling the use of small surface mount inductors. For switching noise sensitive applications, the LTC3604 can be externally synchronized over the same frequency range. An internal phase-locked loop aligns the on-time of the top power MOSFET to the internal or external clock. This unique constant frequency/ controlled on-time architecture is ideal for high step-down ratio applications that demand high switching frequencies and fast transient response.

The LTC3604 offers two operational modes: Burst Mode operation and forced continuous mode to allow the user to optimize output voltage ripple, noise, and light load efficiency for a given application. Maximum light load efficiency is achieved with the selection of Burst Mode operation while forced continuous mode provides minimum output ripple and constant frequency operation.

Features
  • 3.6V to 15V Operating Input Voltage Range
  • 2.5A Output Current
  • Up to 95% Efficiency
  • Very Low Duty Cycle Operation: 5% at 2.25MHz
  • Adjustable Switching Frequency: 800kHz to 4MHz
  • External Frequency Synchronization
  • Current Mode Operation for Excellent Line and Load Transient Response
  • User Selectable Low Ripple (20mVP-P Typical) Burst Mode® (No Load IQ = 300μA) or Forced Continuous Operation
  • 0.6V Reference Allows Low Output Voltages
  • Short-Circuit Protected
  • Output Voltage Tracking Capability
  • Power Good Status Output
  • Available in Small, Thermally Enhanced, 16-Pin QFN (3mm × 3mm) and MSOP Packages
Typical Application

Applications
  • Distributed Power Systems
  • Lithium-Ion Battery-Powered Instruments
  • Point-of-Load Power Supplies
Packaging

Order Information
Part NumberPackageTempPrice(1-99)Price (1k)*
LTC3604EMSE#PBFMS-16EE$4.64$3.25
LTC3604EMSE#TRPBFMS-16EE$3.31
LTC3604EUD#PBF3x3 QFN-16E$4.64$3.25
LTC3604EUD#TRPBF3x3 QFN-16E$3.31
LTC3604IMSE#PBFMS-16EI$5.16$3.61
LTC3604IMSE#TRPBFMS-16EI$3.67
LTC3604IUD#PBF3x3 QFN-16I$5.16$3.61
LTC3604IUD#TRPBF3x3 QFN-16I$3.67
Demo Boards
Part NumberDescriptionPrice
DC1610ALTC3604EUD Demo Board | (QFN) 3.6V ≤ VIN ≤ 15V, VOUT = 1.2V/1.8V/3.3V @ 2.5A$100.00
DC1611ALTC3604EMSE Demo Board | (MSOP) 3.6V ≤ VIN ≤ 15V, VOUT = 1.2V/1.8V/3.3V @ 2.5A$100.00
Datasheet
Reliability Data
LT Journal
Press Release
LTspice
LTpowerCAD
Related Product
LTC3604 - 2.5A, 15V Monolithic Synchronous Step-Down Regulator
LTC3604 Package Drawing LTC3604
R539 - Reliability Data
Two Monolithic DC/DC Converters Take 3.6V–15V Inputs Down to 0.6V at High Frequency, Shrinking Battery-Powered Applications in Everything from Handhelds to Automobiles
单片 DC/DC 转换器缩小汽车电池供电型应用尺寸
采用 3mm x 3mm QFN 封装的15V、4MHz、同步 2.5A 降压型稳压器
LTC3604 Footprints and Symbols
LTC3604 Demo Circuit - Monolithic Synchronous Step-down Regulator (4-15V to 1.8V @ 2.5A)
LTC3604 Project - 2.5A, 15V Monolithic Buck Regulator (4.5-15V to 1.2V @ 2.5A)
LTC3604 Project - 2.5A, 15V Monolithic Buck Regulator (4.5-15V to 1.2V @ 2.5A)