• 简体中文
• English

LTM2884 - Isolated USB Transceiver with Isolated Power

The LTM®2884 is a complete galvanically isolated USB 2.0 compatible μModule® (micromodule) transceiver. An upstream supply powers both sides of the interface through an integrated, isolated DC/DC converter.

The LTM2884 is ideal for isolation in host, hub, bus splitter or peripheral device applications. It is compatible with USB 2.0 full speed (12Mbps) and low speed (1.5Mbps) operation. Automatic speed selection configures integrated pull-up resistors on the upstream port to match those sensed on the downstream device.

The isolator μModule technology uses coupled inductors and an isolated power transformer to provide 2500VRMS of isolation between the upstream and downstream USB interface. This device is ideal for systems requiring isolated ground returns or large common mode voltage variations. Uninterrupted communication is guaranteed for common mode transients greater than 30kV/μs.

Enhanced ESD protection allows this part to withstand up to ±15kV (human body model) on the USB transceiver interface pins to local supplies and ±15kV through the isolation barrier to supplies without latch-up or damage.

Features Isolated USB Transceiver: 2500VRMS for 1 Minute UL-CSA Recognized File #E151738 USB 2.0 Full Speed and Low Speed Compatible Integrated Isolated DC/DC Converter, External or Bus Powered Auto-Configuration of Bus Speed 2.5W (500mA at 5V) Output Power from External Input Supply (VCC = 8.6V to 16.5V) 1W (200mA at 5V) Output Power from USB Bus Supply (VBUS) 3.3V LDO Output Supply Signal References VLO, VLO2 High Common Mode Transient Immunity: 30kV/μs ESD: ±15kV HBM on USB Interface Pins 15mm × 15mm × 5mm Surface Mount BGA Package Typical Application

Applications Isolated USB Interfaces Host, Hub, or Device Isolation Industrial/Medical Data Acquisition Packaging

Demo Boards