• 简体中文
• English

LTM4604A - Low Voltage, 4A DC/DC μModule (Power Module) Regulator with Tracking

The LTM®4604A is a complete 4A switch mode step-down μModule® (power module) regulator with ±1.75% maximum total output voltage error. Included in the package are the switching controller, power FETs, inductor and all support components. Operating over an input voltage range of 2.375V to 5.5V, the LTM4604A supports an output voltage range of 0.8V to 5V, set by a single resistor. This high efficiency design delivers up to 4A continuous current (5A peak). Only input and output capacitors are needed to complete the design.

The 0.630mm LGA pads with 1.27mm pitch simplify PCB layout by providing standard trace routing and via placement. (The LTM4604A has smaller pads than the LTM4604). The low profile package enables utilization of unused space on the bottom of PC boards for high density point of load regulation. High switching frequency and a current mode architecture enable a very fast transient response to line and load changes without sacrificing stability.

Fault protection features include foldback current protection, thermal shutdown and a programmable soft-start function. The LTM4604A is offered with SnPb (BGA) or RoHS-compliant terminal finish.

Features Complete Standalone Power Supply ±1.75% Max Total DC Output Error (–40°C to 125°C) Wide Input Voltage Range: 2.375V to 5.5V 4A DC, 5A Peak Output Current 0.8V to 5V Output Output Voltage Tracking UltraFastTM Transient Response Power Good Indicator Current Mode Control Current Foldback Protection, Parallel/Current Sharing Up to 95% Efficiency Programmable Soft-Start Micropower Shutdown: IQ ≤ 7μA Overtemperature Protection 9mm × 15mm × 2.32mm LGA and 9mm × 15mm × 3.42mm BGA Packages Typical Application

Applications Telecom and Networking Equipment Servers Storage Cards ATCA Cards Industrial Equipment Packaging

Demo Boards