• 简体中文
• English

LTM4615 - Triple Output, Low Voltage DC/DC μModule (Power Module) Regulator

The LTM4615 is a complete 4A dual output switching mode DC/DC power supply plus an additional 1.5A VLDO (very low dropout) linear regulator. Included in the package are the switching controllers, power FETs, inductors, a 1.5A regulator and all support components. The dual 4A DC/DC converters operate over an input voltage range of 2.375V to 5.5V, and the VLDO operates from a 1.14V to 3.5V input. The LTM4615 supports output voltages ranging from 0.8V to 5V for the DC/DC converters, and 0.4V to 2.6V for the VLDO. The three regulator output voltages are set by a single resistor for each output. Only bulk input and output capacitors are needed to complete the design. The low profile package (2.82mm) enables utilization of unused space on the bottom of PC boards for high density point of load regulation. High switching frequency and a current mode architecture enables a very fast transient response to line and load changes without sacrificing stability. The device supports output voltage tracking for supply rail sequencing. Additional features include overvoltage protection, foldback overcurrent protection, thermal shutdown and programmable soft-start. The power module is offered in a space saving and thermally enhanced 15mm × 15mm × 2.82mm LGA package. The LTM4615 is Pb-free and RoHS compliant.

Features Dual 4A Output Power Supply with 1.5A VLDO™ Short-Circuit and Overtemperature Protection Power Good Indicators Input Voltage Range: 2.375V to 5.5V 4A DC Typical, 5A Peak Output Current Each 0.8V Up to 5V Output Each, Parallelable ±2% Total DC Output Error Output Voltage Tracking Up to 95% Efficiency Programmable Soft-Start VLDO, 1.14V to 3.5V Input Range VLDO, 0.4V to 2.6V, 1.5A Output VLDO, 40dB Supply Rejection at fSW ±1% Total DC Output Error Small and Very Low Profile Package: 15mm × 15mm × 2.82mm Typical Application

Packaging

Demo Boards