• 简体中文
• English

LTM4616 - Dual 8A per Channel Low VIN DC/DC μModule (Power Module) Regulator

The LTM®4616 is a complete dual 2-phase 8A per channel switch mode DC/DC power regulator system in a 15mm × 15mm surface mount LGA or BGA package. Included in the package are the switching controller, power FETs, inductor and all support components. Operating from an input voltage range of 2.7V to 5.5V, the LTM4616 supports two outputs within a voltage range of 0.6V to 5V, each set by a single external resistor. This high efficiency design delivers up to 8A continuous current (10A peak) for each output. Only bulk input and output capacitors are needed, depending on ripple requirement. The part can also be configured for a 2-phase single output at up to 16A.

The low profile package enables utilization of unused space on the back side of PC boards for high density point-ofload regulation.

Fault protection features include overvoltage protection, overcurrent protection and thermal shutdown. The power module is offered in space saving and thermally enhanced 15mm × 15mm × 2.82mm LGA and 15mm × 15mm × 3.42mm BGA packages. The LTM4616 is available with SnPb (BGA) or RoHS compliant terminal finish.

Features Complete Dual DC/DC Regulator System Input Voltage Range: 2.7V to 5.5V Dual 8A Outputs, or Single 16A Output with a 0.6V to 5V Range Output Voltage Tracking and Margining ±1.75% Total DC Output Error (–55°C to 125°C) Current Mode Control/Fast Transient Response Power Good Tracking and Margining Overcurrent/Thermal Shutdown Protection Onboard Frequency Synchronization Spread Spectrum Frequency Modulation Multiphase Operation Selectable Burst Mode® Operation Output Overvoltage Protection SnPb (BGA) or RoHS Compliant (LGA and BGA) Finish Small Surface Mount Footprint, Low Profile (15mm × 15mm × 2.82mm) LGA and (15mm × 15mm × 3.42mm) BGA Packages Typical Application

Applications Telecom, Networking and Industrial Equipment Storage and ATCA, PCI Express Cards Battery Operated Equipment Packaging

Demo Boards