• 简体中文
• English

LTM8064 - 58VIN, 6A CVCC Step-Down μModule Regulator

The LTM®8064 is a 58VIN, 6A, constant-voltage, constantcurrent (CVCC), step-down μModule® (power module) regulator. Included in the package are the switching controller, power switches, inductor and support components. Operating over an input voltage range of 6V to 58V, the LTM8064 supports an output voltage range of 1.2V to 36V. CVCC operation allows the LTM8064 to accurately regulate its output current up to 7A when sourcing and 9.1A when sinking over the entire output range. The output current can be set by a control voltage, a single resistor or a thermistor. To set the switching frequency, simply place a resistor from the RT pin to ground. A resistor from FB to ground will set the output voltage. Only the bulk input and output filter capacitors are needed to finish the design.

The LTM8064 is packaged in a thermally enhanced, compact (16mm × 11.9mm × 4.92mm) over-molded ball grid array (BGA) package suitable for automated assembly by standard surface mount equipment. The LTM8064 is RoHS compliant.

Features Complete Step-Down Switch Mode Power Supply CVCC: Constant-Voltage, Constant-Current 2-Quadrant: Sources and Sinks Output Current Parallelable for Increased Output Current, Even from Different Voltage Sources Adjustable Output Current Up to 7A When Sourcing or 9.1A When Sinking Wide Input Voltage Range: 6V to 58V 1.2V to 36V Output Voltage Selectable Switching Frequency: 100kHz to 1MHz (e1) RoHS Compliant Package Programmable Soft-Start Tiny (16mm × 11.9mm × 4.92mm) Surface Mount BGA Package Typical Application

Applications Short- Circuit Protection or Accurate Output Current Limit High Power LED Drive Peltier Driver Motor Drive Battery/Supercap Charging and Cell Balancing Packaging

Demo Boards