• 简体中文
• English

DS12887, DS12887A：Real-Time Clocks

The DS12885, DS12887, and DS12C887 real-time clocks (RTCs) are designed to be direct replacements for the DS1285 and DS1287. The devices provide a real-time clock/calendar, one time-of-day alarm, three maskable interrupts with a common interrupt output, a programmable square wave, and 114 bytes of battery-backed static RAM (113 bytes in the DS12C887 and DS12C887A). The DS12887 integrates a quartz crystal and lithium energy source into a 24-pin encapsulated DIP package. The DS12C887 adds a century byte at address 32h. For all devices, the date at the end of the month is automatically adjusted for months with fewer than 31 days, including correction for leap years. The devices also operate in either 24-hour or 12-hour format with an AM/PM indicator. A precision temperature-compensated circuit monitors the status of VCC. If a primary power failure is detected, the device automatically switches to a backup supply. A lithium coin-cell battery can be connected to the VBAT input pin on the DS12885 to maintain time and date operation when primary power is absent. The device is accessed through a multiplexed byte-wide interface, which supports both Intel and Motorola modes.

Key Features Drop-In Replacement for IBM AT Computer Clock/Calendar RTC Counts Seconds, Minutes, Hours, Day, Date, Month, and Year with Leap Year Compensation Through 2099 Binary or BCD Time Representation 12-Hour or 24-Hour Clock with AM and PM in 12-Hour Mode Daylight Saving Time Option Selectable Intel or Motorola Bus Timing Interfaced with Software as 128 RAM Locations 14 Bytes of Clock and Control Registers 114 Bytes of General-Purpose, Battery-Backed RAM (113 Bytes in the DS12C887 and DS12C887A) RAM Clear Function (DS12885, DS12887A, and DS12C887A) Interrupt Output with Three Independently Maskable Interrupt Flags Time-of-Day Alarm Once Per Second to Once Per Day Periodic Rates from 122µs to 500ms End-of-Clock Update Cycle Flag Programmable Square-Wave Output Automatic Power-Fail Detect and Switch Circuitry Optional 28-Pin PLCC Surface Mount Package or 32-Pin TQFP (DS12885) Optional Encapsulated DIP (EDIP) Package with Integrated Crystal and Battery (DS12887, DS12887A, DS12C887, DS12C887A) Optional Industrial Temperature Range Available

DS12885, DS12887, DS12887A, DS12C887, DS12C887A: Typical Operating Circuit Applications/Uses Embedded Systems Network Hubs, Bridges, and Routers Security Systems Utility Meters

DataSheet

Parametrics

Quality and Environmental Data

• DS12887.pdf

Ordering Information