• 简体中文
• English

DS1825：Programmable Resolution 1-Wire Digital Thermometer With 4-Bit ID

The DS1825 digital thermometer provides 9 to 12-bit centigrade temperature measurements and has an alarm function with NV user-programmable upper and lower trigger points. The DS1825 communicates over a 1-Wire® bus that by definition requires only one data line (and ground) for communication with a central microprocessor. It has an operating temperature range of -55°C to +125°C and is accurate to ±0.5°C over the range of -10°C to +85°C. In addition, the DS1825 can derive power directly from the data line (“parasite power”), eliminating the need for an external power supply. Each DS1825 has a unique 64-bit serial code, which allows multiple DS1825s to function on the same 1-Wire bus; thus, it is simple to use one microprocessor to control many DS1825s distributed over a large area. In addition, the 4-bit location address can be used to identify specific temperature sensors in the system without requiring a wide lookup table. Applications that can benefit from this feature include HVAC environmental controls, temperature monitoring systems inside buildings, equipment or machinery, and process monitoring and control systems.

Key Features Unique 1-Wire Interface Requires Only One Port Pin for Communication Each Device has a Unique 64-Bit Serial Code Stored in an On-Board ROM Multidrop Capability Simplifies Distributed Temperature-Sensing Applications 4 Pin-Programmable Bits to Uniquely Identify Up to 16 Sensor Locations on a Bus Requires No External Components Can be Powered from Data Line. Power Supply Range: 3.0V to 3.7V Measures Temperatures from -55°C to +125°C(-67°F to +257°F) ±0.5°C Accuracy from -10°C to +85°C Thermometer Resolution is User-Selectable from 9 to 12 Bits Converts Temperature to 12-Bit Digital Word in 750ms (max) User-Definable (NV) Alarm Settings Alarm Search Command Identifies and Addresses Devices Whose Temperature is Outside of Programmed Limits (Temperature Alarm Condition) Available in 8-Pin µSOP Package Software Compatible with the DS1822

DS1825: Block Diagram Applications/Uses Consumer Products Industrial Systems Thermally Sensitive Systems Thermometers Thermostatic Controls

DataSheet

Parametrics

Quality and Environmental Data

• DS1825.pdf

Ordering Information