DS2413:1-Wire Dual Channel Addressable Switch

1-Wire, Dual-Channel, Addressable Switch Features Open-Drain, Programmable I/O Pins

The DS2413 is a dual-channel programmable I/O 1-Wire® chip. The PIO outputs are configured as open-drain and provide up to 20mA continuous sink capability and off-state operating voltage up to 28V. Control and sensing of the PIO pins is performed with a dedicated device-level command protocol. To provide a high level of fault tolerance in the end application, the 1-Wire I/O and PIO pins are all capable of withstanding continuous application of voltages up to 28V max. Communication and operation of the DS2413 is performed with the single contact Maxim 1-Wire serial interface.

Key Features
  • Controls Dual Programmable High Voltage, High Current I/O Port Pins from a Single Micro Port Pin
    • Open-Drain Programmable I/O Pins Support 20mA max Continuous Current Sink
    • 28V (max) PIO Pin Operating Voltage
    • On-Resistance of PIO Pulldown Transistor 20Ω max; OFF Resistance 1MΩ min
    • Parasitic Power Supply Through 1-Wire
  • Minimalist 1-Wire Interface Lowers Cost and Interface Complexity
    • Communicates to Host with a Single Digital Signal at 14.9kb or 100kbps
    • Switchpoint Hysteresis and Filtering to Optimize Performance in the Presence of Noise
    • 1-Wire IO Pin Supports 28V Absolute Maximum DC Level for Fault Conditions
    • Unique 64-bit ROM Serial Number Factory Lasered Into Each Device
    • High ESD Immunity of 1-Wire IO Pin: 8kV HBM Typical
    • TSOC and TDFN Packages Available
  • Wide Voltage and Temperature Operating Ranges Enables Robust System Performance
    • 2.8V to 5.25V
    • 0°C to +70°C
DS2413: Typical Operating Circuit
DS2413: Typical Operating Circuit
Applications/Uses
  • Accessory Identification and Control
  • General Purpose Input/Output
  • Industrial Controllers
  • Key-Pick Systems
  • LED Control
  • System Monitoring
DataSheet
titleDownload file
DS2413 Data SheetDS2413.pdf
Parametrics
Part NumberApplicationsMemory TypeBus TypeVSUPPLY
(V)
VSUPPLY
(V)
Package/PinsBudgetary
Price
minmaxSee Notes
DS2413Peripheral ID and ControlROM1-Wire2.85.25TDFN-EP/6
TSOC/6
$1.14 @1k
Design kits & evaluation modules
Quality and Environmental Data
Related Products
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
DS2413P+ActiveTSOC,;6 pin;17.8 mm²0°C to +70°CLead Free
DS2413P+T&RActiveTSOC,;6 pin;17.8 mm²0°C to +70°CLead Free
DS2413Q+T&RActiveTDFN-EP,;6 pin;9.6 mm²0°C to +70°CLead Free
DS2413Q+UActiveTDFN-EP,;6 pin;9.6 mm²0°C to +70°CLead Free
DS2413.pdf DS2413
DS2413_cn.pdf DS2413
DS2413.pdf DS2413
DS2413.pdf DS2413
Create a 1-Wire Master with Xilinx PicoBlaze DS1990A
Understanding the DS1WM Synthesizable 1-Wire Bus Master DS1923
How to Build a 1-Wire® Evaluation Kit DS9490R
One-Wire Network Controls Remote SPI Peripherals DS2413
Bridge from USB to I²C DS9490R
Reading and Writing 1-Wire® Devices Through Serial Interfaces DS1923
DS2413.pdf DS2413
DS2413_cn.pdf DS2413