DS3881：Single-Channel, Automotive CCFL Controller _ BDTIC a Leading Distributor in China

DS3881：Single-Channel, Automotive CCFL Controller

Low Component Count, Feature-Rich, Automotive Inverter Solution

The DS3881 is a single-channel cold-cathode fluorescent lamp (CCFL) controller for automotive applications that provides up to 300:1 dimming. It is ideal for driving CCFLs used to backlight liquid crystal displays (LCDs) in navigation and infotainment applications and for driving CCFLs used to backlight instrument clusters. The DS3881 is also appropriate for use in marine and aviation applications. The DS3881 features EMI suppression functionality and provides a lamp current overdrive mode for rapid lamp heating in cold weather conditions. The DS3881 supports a single lamp configuration with fully independent lamp control and minimal external components. Multiple DS3881 controllers can be cascaded to support applications requiring more than one lamp. Control of the DS3881, after initial programming setup, can be completely achieved through I²C software communication. Many DS3881 functions are also pin-controllable if software control is not desired.

Key Features

Single-Channel CCFL Controller for Backlighting LCD Panels and Instrument Clusters in Automotive Navigation/Infotainment Applications
Minimal External Components Required
I²C Interface
Per-Channel Lamp-Fault Monitoring for Lamp-Open, Lamp-Overcurrent, Failure to Strike, and Overvoltage Conditions
Status Register Reports Fault Conditions
Accurate (±5%) Independent On-Board Oscillators for Lamp Frequency (40kHz to 100kHz) and DPWM Burst-Dimming Frequency (22.5Hz to 440Hz)
Lamp and DPWM Frequencies can be Synchronized with External Sources to Reduce Visual LCD Artifacts in Video Applications
Spread-Spectrum Lamp Clock Reduces EMI
Lamp Frequency can be Stepped Up or Down to Move EMI Spurs Out of Band
Lamp Current Overdrive Mode with Automatic Turn-Off Quickly Warms Lamp in Cold Temperatures
Analog or Digital Brightness Control
300:1 Dimming Range Possible Using the Digital Brightness Control Option
Programmable Soft-Start Minimizes Audible Transformer Noise
On-Board Nonvolatile (NV) Memory Allows Device Customization
8-Byte NV User Memory for Storage of Serial Numbers and Date Codes
Low-Power Standby Mode
4.75V to 5.25V Single-Supply Operation
Temperature Range: -40°C to +105°C
24-Pin TSSOP Package

DS3881: Typical Operating Circuit

Applications/Uses

Automotive LCDs
Instrument Clusters
Marine and Aviation LCDs

DataSheet

title	Download file
DS3881 Data Sheet	DS3881.pdf

Parametrics

Part Number	V_IN (V)	V_IN (V)	Topology	Channels	Dimming Interface	Freq.	Package/Pins	Oper. Temp. (°C)
Part Number	min	max	Topology	Channels	Dimming Interface	Freq.	Package/Pins	Oper. Temp. (°C)
DS3881	4.75	5.25	Push-Pull	1	Analog DPWM I2C SMBus	Fixed PWM	See Data Sheet	-40 to +105

Quality and Environmental Data

DS3881.pdf