DS4560:12V Hot-Plug Switch

Integrated, Self-Protected Electronic Switch Allows the Safe Insertion and Removal of Equipment Into 12V Backplanes

The DS4560 is a self-contained hot-plug switch intended to be used on +12V power buses to limit through current and to control the power-up output-voltage ramp. The device contains an on-board 25mΩ n-channel power MOSFET that is actively closed-loop controlled to ensure that an adjustable current limit is not exceeded. The maximum allowable current through the device is determined by an external resistor connected to the ILIM pin. The DS4560 also contains the ability to control the power-up output-voltage ramp. A capacitor connected to the VRAMP pin sets the desired voltage ramp rate. The output voltage is unconditionally clamped to keep input overvoltage stresses from harming the load. The DS4560 also contains an adjustable power-up timer. A capacitor connected to the TIMER pin determines how long after power-on reset the DS4560 should wait before starting to apply power to the load. The TIMER pin can also be driven with a digital logic output to create a device-enable function. The DS4560 contains an on-board temperature sensor with hysteresis. If operating conditions cause the device to exceed an internal thermal limit, the DS4560 either unconditionally shuts down and latches off awaiting a power-on reset (DS4560S-LO), or it waits until the device has cooled by the hysteresis amount and then restarts (DS4560S-AR).

Key Features
  • On-Board 25mΩ Power MOSFET
  • Adjustable Short-Circuit Current and Overload Current Limit
  • Adjustable Output-Voltage Slew Rate
  • Adjustable Power-Up Timer with External Enable Capability
  • Output Overvoltage Limiting
  • On-Board Thermal Protection
  • On-Board Charge Pump
  • Latchoff and Autoretry Versions Available
  • 9.0V to 13.2V Supply Operation
  • 8-Pin SO (150 mils) Pb-Free Package
  • UL Certification Record E211395
DS4560: Typical Application Circuit
DS4560: Typical Application Circuit
Applications/Uses
  • Base Stations
  • InfiniBand™
  • PCI/PCI Express®
  • RAID/Hard Drives
  • Servers/Routers
DataSheet
titleDownload file
DS4560 Data SheetDS4560.pdf
Parametrics
Part NumberVIN
(V)
VIN
(V)
Circuit Breaker/ Current LimitFault Condition ControlChannelsPositive/Negative RailFeaturesPackage/PinsBudgetary
Price
minmaxSee Notes
DS4560913.2Current LimitLatched Off
Periodic Retry
1PositiveIntegrated MOSFET
Undervoltage/Overvoltage Protection
SOIC(N)/8$1.14 @1k
Quality and Environmental Data
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
DS4560LS-AR+No Longer AvailableSOIC(N),;8 pin;31 mm²-40°C to +85°CLead Free
DS4560LS-AR+TNo Longer AvailableSOIC(N),;8 pin;31 mm²-40°C to +85°CLead Free
DS4560LS-LO+No Longer AvailableSOIC(N),;8 pin;31 mm²-40°C to +85°CLead Free
DS4560LS-LO+TNo Longer AvailableSOIC(N),;8 pin;31 mm²-40°C to +85°CLead Free
DS4560S-AR+ActiveSOIC(N),;8 pin;31 mm²Special - See Data SheetLead Free
DS4560S-AR+TActiveSOIC(N),;8 pin;31 mm²Special - See Data SheetLead Free
DS4560S-LO+ActiveSOIC(N),;8 pin;31 mm²Special - See Data SheetLead Free
DS4560S-LO+TActiveSOIC(N),;8 pin;31 mm²Special - See Data SheetLead Free
DS4560.pdf DS4560
DS4560_cn.pdf DS4560
DS4560.pdf DS4560
DS4560.pdf DS4560
DS4560.pdf DS4560
DS4560_cn.pdf DS4560