DS4830：Optical Microcontroller _ BDTIC a Leading Distributor in China

DS4830：Optical Microcontroller

Rich Optical Feature Set Eases Controller Implementation in High-Performance Optical Transceivers

The DS4830 provides a complete optical control, calibration, and monitor solution based on a low-power, 16-bit, microcontroller core, providing program and RAM data memory. I/O resources include a fast/accurate analog-to-digital converter (ADC), fast comparators with an internal comparison digital-to-analog converter (DAC), 12-bit DACs, 12-bit PWMs, internal and external temperature sensors, fast sample/hold, I2C slave host interface, and a multiprotocol serial master/slave interface. Direct connection of diode-connected transistors, used as remote temperature sensors, is supported as well as expansion to additional external digital temperature sensor ICs using the on-chip master I2C interface. An independent slave I2C interface facilitates communication to a host microprocessor in addition to password-protected in-system reprogramming of the on-chip flash. Firmware development is supported by third-party highly versatile C-compilers and development software that programs flash and performs in-circuit debug through the integrated JTAG interface and associated hardware.

Key Features

16-Bit Low-Power Microcontroller
36 kWords Total Program Memory
- 32 kWords Flash Program Memory
- 4 kWords ROM Program Memory
1 kWords Data RAM
8 DAC Channels
- 12-Bit Buffered Voltage DACs
- Internal or External Reference
10 PWM Channels
- Boost/Buck DC-DC Control with Support for 7-Bit to 12-Bit Resolution and 1MHz Switching Frequency
- Supports 4-Channel TECC H-Bridge Control
8-Bit Fast Comparator with 16-Input Mux
- 1.6µs per Comparison
13-Bit A/D Converter with 26-Input Mux (27ksps)
Temperature Measurement Analog Front-End
- Internal Temperature Sensor, &plusnm;3°C
- 0.0625°C Resolution
- Supports Two External Temperature Sensors
- Differential Rail-Rail Inputs
31 GPIO Pins
Maskable Interrupt Sources
Internal 20MHz Oscillator, CPU Core Frequency 10MHz
- 4% Accurate from 0°C to +50°C
Up to 133MHz External Clock for PWM and Timers
Slave Communication Interface: SPI or 400kHz I2C-Compatible 2-Wire
Master Communication Interface: SPI, 400kHz I2C-Compatible, or Maxim 3-Wire Laser Driver
I2C and JTAG Bootloader
Two 16-Bit Timers
2.97V to 3.63V Operating Voltage Range
Brownout Monitor
JTAG Port with In-System Debug and Programming
Low Power Consumption (16mA) with All Analog Active

DS4830: Typical Application Circuit

Applications/Uses

Optical Transceivers: XFP, SFP, SFP+, QSFP, 40G, 100G
PON Diplexers and Triplexers: GPON, 10GEPON, XPON OLT, ONU

DataSheet

title	Download file
DS4830 Data Sheet	DS4830.pdf

Parametrics

Part Number	ADCs	Resolution (bits)	DACs/ Resistors	FS Out (kΩ)	Steps	Temp. Sensor	Memory	V_SUPPLY (V)	Control Interface	Package/Pins	Budgetary Price
Part Number	ADCs	Resolution (bits)	DACs/ Resistors	FS Out (kΩ)	Steps	Temp. Sensor	Memory	V_SUPPLY (V)	Control Interface	Package/Pins	See Notes
DS4830	18-Input Muxable	13	2 DACs 8 DACs	None	None	Internal	Program	3.0 to 3.6	I2C JTAG Bootloader	TQFN/40	$3.00 @1k

Part Number	MCU Core	Core Clock Speed (MHz)	Data Processing	Internal Flash (KBytes)	Internal SRAM (KBytes)	SPI Bus	I²C Bus	GPIO Pins	PWM	Timer Features	Package/Pins	Budgetary Price
Part Number	MCU Core	max	Data Processing	Internal Flash (KBytes)	Internal SRAM (KBytes)	SPI Bus	I²C Bus	max	PWM	Timer Features	Package/Pins	See Notes
DS4830	MAXQ20	10	16-bit	32	1	2	1 Master & 1 Slave	31	10	Brownout Monitor	TQFN/40	$3.00 @1k

Quality and Environmental Data

DS4830.pdf

Ordering Information

Part Number	Status	Package	Temp	RoHS
DS4830EVKIT#	No Longer Available	EVKIT;	-40°C to +85°C	See data sheet
DS4830RD#	Active	EVKIT;	-40°C to +85°C	See data sheet
DS4830T+	Active	TQFN,;40 pin;26 mm²	-40°C to +85°C	Lead Free
DS4830T+T	Active	TQFN,;40 pin;26 mm²	-40°C to +85°C	Lead Free