• 简体中文
• English

MAX1040：10-Bit, Multichannel ADCs/DACs with FIFO, Temperature Sensing, and GPIO Ports

The MAX1040/MAX1042/MAX1046/MAX1048 integrate a multichannel, 10-bit, analog-to-digital converter (ADC) and a quad, 10-bit, digital-to-analog converter (DAC) in a single IC. The devices also include a temperature sensor and configurable general-purpose I/O ports (GPIOs) with a 25MHz SPI™-/QSPI™-/MICROWIRE™-compatible serial interface. The ADC is available in a four or an eight input-channel version. The four DAC outputs settle within 2.0µs, and the ADC has a 225ksps conversion rate. All devices include an internal reference (4.096V) providing a well-regulated, low-noise reference for both the ADC and DAC. Programmable reference modes for the ADC and DAC allow the use of an internal reference, an external reference, or a combination of both. Features such as an internal ±1°C accurate temperature sensor, FIFO, scan modes, programmable internal or external clock modes, data averaging, and AutoShutdown™ allow users to minimize both power consumption and processor requirements. The low glitch energy (4nV•s) and low digital feedthrough (0.5nV•s) of the integrated quad DACs make these devices ideal for digital control of fast-response closed-loop systems. The devices are guaranteed to operate with a supply voltage from +4.75V to +5.25V. These devices consume 2.5mA at 225ksps throughput, only 22µA at 1ksps throughput, and under 0.2µA in the shutdown mode. The MAX1042/MAX1048 offer four GPIOs that can be configured as inputs or outputs. The MAX1040/MAX1042/MAX1046/MAX1048 are available in 36-pin thin QFN packages. All devices are specified over the -40°C to +85°C temperature range.

Key Features 10-Bit, 225ksps ADC Analog Multiplexer with True-Differential Track/Hold (T/H) Eight Single-Ended Channels or Four Differential Channels (Unipolar or Bipolar) (MAX1040/MAX1042) Four Single-Ended Channels or Two Differential Channels (Unipolar or Bipolar) (MAX1046/MAX1048) Excellent Accuracy: ±0.5 LSB INL, ±0.5 LSB DNL, No Missing Codes Over Temperature 10-Bit, Quad, 2µs Settling DAC Ultra-Low-Glitch Energy (4nV•s) Power-Up Options from Zero Scale or Full Scale Excellent Accuracy: ±0.5 LSB INL Internal Reference or External Single-Ended/Differential Reference Internal Reference Voltage (4.096V) Internal ±1°C Accurate Temperature Sensor On-Chip FIFO Capable of Storing 16 ADC Conversion Results and One Temperature Result On-Chip Channel-Scan Mode and Internal Data-Averaging Features Analog Single-Supply Operation: +4.75V to +5.25V Digital Supply: +2.7V to AVDD 25MHz, SPI/QSPI/MICROWIRE Serial Interface AutoShutdown Between Conversions Low-Power ADC 2.5mA at 225ksps 22µA at 1ksps 0.2µA at Shutdown Low-Power DAC: 1.5mA Evaluation Kit Available (Order MAX1258EVKIT)

MAX1040, MAX1042, MAX1046, MAX1048: Pin Configuration Applications/Uses Closed-Loop Controls for Optical Components and Base Stations Data Acquisition Systems System Supervision and Control

DataSheet

Parametrics

Quality and Environmental Data

• MAX1040.pdf

Related Products

• MAX11621：10-Bit, 300ksps ADCs with FIFO and Internal Reference
• MAX1043：10-Bit, Multichannel ADCs/DACs with FIFO, Temperature Sensing, and GPIO Ports
• MAX1230：12-Bit 300ksps ADCs with FIFO, Temp Sensor, Internal Reference
• MAX148：+2.7V to +5.25V Low-Power 8-Channel Serial 10-Bit ADCs

Ordering Information