MAX11322：1Msps, 10-/12-Bit, 4-/8-/16-Channel ADCs with Post-Mux External Signal Conditioning Access

Pin-/Software-Compatible Family of 1Msps, Multichannel SAR ADCs with External Reference, 1MHz Full Linear Bandwidth, and SPI Interface Offers Rich Feature Set

The MAX11321–MAX11328 are 12-/10-bit with external reference and 500kHz, full-linear-bandwidth, high-speed, low-power, serial-output successive approximation register (SAR) analog-to-digital converters (ADCs). The MAX11321–MAX11328 provide external access to the output of the integrated mux and ADC input, to simplify conditioning. The MAX11321–MAX11328 include both internal and external clock modes. These devices feature scan mode in both internal and external clock modes. The internal clock mode features internal averaging to increase SNR. The external clock mode features the SampleSet™ technology, a user-programmable analog input channel sequencer. The SampleSet approach provides greater sequencing flexibility for multichannel applications while alleviating significant microcontroller or DSP (controlling unit) communication overhead. External pins provide access to the output of the multiplexer and ADC inputs to simplify multichannel signal conditioning. The internal clock mode features an integrated FIFO allowing data to be sampled at high speeds and then held for readout at any time or at a lower clock rate. Internal averaging is also supported in internal clock mode improving SNR for noisy input signals. The devices feature analog input channels that can be configured to be single-ended inputs, fully differential pairs, or pseudo-differential inputs with respect to one common input. The MAX11321–MAX11328 operate from a 2.35V to 3.6V supply and consume only 5.4mW at 1Msps. The MAX11321–MAX11328 include AutoShutdown™, fast wake-up, and a high-speed 3-wire serial interface. The devices feature full power-down mode for optimal power management. The 48MHz, 3-wire serial interface directly connects to SPI, QSPI™, and MICROWIRE® devices without external logic. Excellent dynamic performance, low voltage, low power, ease of use, and small package size make these converters ideal for portable battery-powered data-acquisition applications, and for other applications that demand low power consumption and small space. The MAX11321–MAX11328 are available in 32-pin, 5mm x 5mm, TQFN packages and operate over the -40°C to +125°C temperature range.

Key Features

Highly Integrated Precision ADC Saves Space While Retaining Flexibility
- ±1 LSB INL, ±1 LSB DNL, No Missing Codes
- 70dB SINAD at 100kHz
- 1Msps Conversion Rate with No Pipeline Delay
Analog Multiplexer with True Differential Track/Hold: Any Combination of Single-Ended, Differential and Pseudo-Differential Input Pin Pairs Allowed
- 16-/8-/4-Channel Single-Ended
- 12-/8-/4-Channel Fully-Differential Pairs
- 15-/8-/4-Channel Pseudo-Differential Relative to a Common Input
Two Software-Selectable Bipolar Input Ranges: ±VREF+/2, ±VREF+
External Differential Reference (1V to VDD)
32-Pin, 5mm x 5mm TQFN Package
SampleSet™ Technology Brings Extreme Flexibility to Program Input Configurations Per Channel and Sampling Sequence to Optimize Interface to the Microcontroller
- User-Defined Channel Sequence with Maximum Length of 256
- Scan Modes, Internal Averaging, and Internal Clock
- 16-Entry First-In/First-Out (FIFO)
Post-Mux Signal Access Allows for External Signal Conditioning Between the Mux and the ADC Even for Differential Signals
- Externally Accessible Multiplex Output and ADC Input
Low-Power Consumption Extends Battery Life for Portable Applications
- 1.5V to 3.6V Digital I/O Supply Voltage
- 2.35V to 3.6V Supply Voltage
- 5.4mW at 1Msps with 3V Supplies
- 2µA Full-Shutdown Current
Easy to Interface with Most Microcontrollers
- 16MHz, 3-Wire SPI-/QSPI-/MICROWIRE-/DSP-Compatible Serial Interface

MAX11321, MAX11322, MAX11324, MAX11325, MAX11327, MAX11328: Typical Application Circuit

Applications/Uses

Battery-Powered Instruments
High-Speed Closed-Loop Systems
High-Speed Data Acquisition Systems
Industrial Control Systems
Medical Instrumentation
Portable Systems

DataSheet

title	Download file
MAX11321-MAX11328 Data Sheet	MAX11321-MAX11328.pdf

Parametrics

Part Number	Resolution (bits)	Input Chan.	Conv. Rate (ksps)	ADC Architecture	Data Bus	Diff/S.E. Input	External V_REF (V)	External V_REF (V)	Unipolar V_IN (V)	Bipolar V_IN (±V)	SNR (dB)	THD (dB)	INL (±LSB)	Package/Pins	Budgetary Price
Part Number	ADC	Input Chan.	max	ADC Architecture	Data Bus	Diff/S.E. Input	min	max	max	max	SNR (dB)	THD (dB)	INL (±LSB)	Package/Pins	See Notes
MAX11321	10	4	1000	SAR	3-Wire SPI DSP-Compatible Serial Microwire QSPI	Both	2.35	3.6	3.6	3.6	61.5	-82.5	0.4	TQFN/32	$1.97 @1k
MAX11322	12	4									72.3	-83	1	TQFN/32	$2.15 @1k
MAX11324	10	8									61.5	-82.5	0.4	TQFN/32	$2.45 @1k
MAX11325	12	8									72.3	-83	1	TQFN/32	$3.26 @1k
MAX11327	10	16									61.5	-82.5	0.4	TQFN/32	$3.55 @1k
MAX11328	12	16									72.3	-83	1	TQFN/32	$4.00 @1k

Ordering Information

Part Number	Status	Recommended Replacement	Package	Temp	RoHS
MAX11322ATJ+	Active		TQFN,;32 pin;26 mm²	-40°C to +125°C	Lead Free
MAX11322ATJ+T	Active		TQFN,;32 pin;26 mm²	-40°C to +125°C	Lead Free

MAX11321-MAX11328.pdf MAX11328

MAX11321-MAX11328.pdf MAX11324