• 简体中文
• English

MAX1193：Ultra-Low-Power, 45Msps, Dual 8-Bit ADC

The MAX1193 is an ultra-low-power, dual, 8-bit, 45Msps analog-to-digital converter (ADC). The device features two fully differential wideband track-and-hold (T/H) inputs. These inputs have a 440MHz bandwidth and accept fully differential or single-ended signals. The MAX1193 delivers a typical signal-to-noise and distortion (SINAD) of 48.5dB at an input frequency of 5.5MHz and a sampling rate of 45Msps while consuming only 57mW. This ADC operates from a 2.7V to 3.6V analog power supply. A separate 1.8V to 3.6V supply powers the digital output driver. In addition to ultra-low operating power, the MAX1193 features three power-down modes to conserve power during idle periods. Excellent dynamic performance, ultra-low power, and small size make the MAX1193 ideal for applications in imaging, instrumentation, and digital communications. An internal 1.024V precision bandgap reference sets the full-scale range of the ADC to ±0.512V. A flexible reference structure allows the MAX1193 to use its internal reference or accept an externally applied reference for applications requiring increased accuracy. The MAX1193 features parallel, multiplexed, CMOS-compatible tri-state outputs. The digital output format is offset binary. A separate digital power input accepts a voltage from 1.8V to 3.6V for flexible interfacing to different logic levels. The MAX1193 is available in a 5mm x 5mm, 28-pin thin QFN package, and is specified for the extended industrial (-40°C to +85°C) temperature range. For higher sampling frequency applications, refer to the MAX1195-MAX1198 dual 8-bit ADCs. See a parametric table of the complete family of pin-compatible, 8-bit high-speed ADCs.

Key Features Ultra-Low Power 57mW (Normal Operation: 45Msps) 0.3µW (Shutdown Mode) Excellent Dynamic Performance 48.5dB/48.3dB SNR at fIN = 5.5MHz/100MHz 70dBc/68dBc SFDR at fIN = 5.5MHz/100MHz 2.7V to 3.6V Single Analog Supply 1.8V to 3.6V TTL/CMOS-Compatible Digital Outputs Fully Differential or Single-Ended Analog Inputs Internal/External Reference Option Multiplexed CMOS-Compatible Tri-State Outputs 28-Pin Thin QFN Package Evaluation Kit Available (Order MAX1193EVKIT)

MAX1193: Functional Diagram Applications/Uses Battery-Powered Portable Instruments IQ Baseband Sampling Low-Power Video Ultrasound and Medical Imaging WLAN, Mobile DSL, WLL Receiver

DataSheet

Parametrics

Design kits & evaluation modules

• MAX1193EVKIT

Quality and Environmental Data

• MAX1193.pdf

Related Products

• MAX1192：Ultra-Low-Power, 22Msps, Dual 8-Bit ADC
• MAX1191：Ultra-Low-Power, 7.5Msps, Dual, 8-Bit ADC
• MAX1196：Dual 8-Bit, 40Msps, 3V, Low-Power ADC with Internal Reference and Multiplexed Parallel Outputs
• MAX1198：Dual, 8-Bit, 100Msps, 3.3V, Low-Power ADC with Internal Reference and Parallel Outputs
• MAX1197：Dual, 8-Bit, 60Msps, 3V, Low-Power ADC with Internal Reference and Parallel Outputs
• MAX1195：Dual, 8-Bit, 40Msps, 3V, Low-Power ADC with Internal Reference and Parallel Outputs

Ordering Information