• 简体中文
• English

MAX1202：5V, 8-Channel, Serial, 12-Bit ADCs with 3V Digital Interface

Ideal for 12-Bit +5V or +/-5V Analog, +3V Digital Systems

The MAX1202/MAX1203 are 12-bit data-acquisition systems specifically designed for use in applications with mixed +5V (analog) and +3V (digital) supply voltages. They operate with a single +5V analog supply or dual ±5V analog supplies, and combine an 8-channel multiplexer, high-bandwidth track/hold, and serial interface with high conversion speed and low power consumption. A 4-wire serial interface connects directly to SPI/MICROWIRE® devices without external logic, and a serial strobe output allows direct connection to TMS320-family digital signal processors. The MAX1202/MAX1203 use either the internal clock or an external serial-interface clock to perform successive approximation analog-to-digital conversions. The serial interface operates at up to 2MHz. The MAX1202 features an internal 4.096V reference, while the MAX1203 requires an external reference. Both parts have a reference-buffer amplifier that simplifies gain trim. They also have a VL pin that is the power supply for the digital outputs. Output logic levels (3V, 3.3V, or 5V) are determined by the value of the voltage applied to this pin. These devices provide a hard-wired active-low SHDN pin and two software-selectable power-down modes. Accessing the serial interface automatically powers up the devices. A quick turn-on time enables the MAX1202/MAX1203 to be shut down between conversions, allowing the user to optimize supply currents. By customizing power-down between conversions, supply current can drop below 10µA at reduced sampling rates. The MAX1202/MAX1203 are available in 20-pin SSOP and PDIP packages, and are specified for the commercial and extended temperature ranges.

Key Features 8-Channel Single-Ended or 4-Channel Differential Inputs Operates from Single +5V or Dual ±5V Supplies User-Adjustable Output Logic Levels (2.7V to 5.25V) Low Power: 1.5mA (Operating Mode) 2µA (Power-Down Mode) Internal Track/Hold, 133kHz Sampling Rate Internal 4.096V Reference (MAX1202) SPI/MICROWIRE/TMS320-Compatible 4-Wire Serial Interface Software-Configurable Unipolar/Bipolar Inputs 20-Pin PDIP/SSOP

MAX1202, MAX1203: Typical Operating Circuit Applications/Uses 5V/3V Mixed-Supply Systems Battery-Powered Applications Data Acquisition High-Accuracy Process Control Medical Instruments

DataSheet

Parametrics

Design kits & evaluation modules

• MAX1202EVKIT
• MAX1203EVKIT

Related Products

• MAX11637：12-Bit, 300ksps ADCs with Differential Track/Hold, and Internal Reference
• MAX11629：12-Bit, 300ksps ADCs with FIFO and Internal Reference
• MAX146：+2.7V, Low-Power, 8-Channel, Serial 12-Bit ADCs
• MAX147：+2.7V, Low-Power, 8-Channel, Serial 12-Bit ADCs

Ordering Information