• 简体中文
• English

MAX12555：14-Bit, 95Msps, 3.3V ADC

The MAX12555 is a 3.3V, 14-bit, 95Msps analog-to-digital converter (ADC) featuring a fully differential wideband track-and-hold (T/H) input amplifier, driving a low-noise internal quantizer. The analog input stage accepts single ended or differential signals. The MAX12555 is optimized for high dynamic performance, low power, and small size. Excellent dynamic performance is maintained from baseband to input frequencies of 175MHz and beyond, making the MAX12555 ideal for intermediate frequency (IF) sampling applications. Powered from a single 3.3V supply, the MAX12555 consumes only 497mW while delivering a typical 72.1dB signal-to-noise ratio (SNR) performance at a 175MHz input frequency. In addition to low operating power, the MAX12555 features a 300µW power-down mode to conserve power during idle periods. A flexible reference structure allows the MAX12555 to use the internal 2.048V bandgap reference or accept an externally applied reference. The reference structure allows the full-scale analog input range to be adjusted from ±0.35V to ±1.10V. The MAX12555 provides a common- mode reference to simplify design and reduce external component count in differential analog input circuits. The MAX12555 supports either a single-ended or differential input clock. Wide variations in the clock duty cycle are compensated with the ADC's internal dutycycle equalizer (DCE). ADC conversion results are available through a 14-bit, parallel, CMOS-compatible output bus. The digital output format is pin selectable to be either two's complement or Gray code. A data-valid indicator eliminates external components that are normally required for reliable digital interfacing. A separate digital power input accepts a wide 1.7V to 3.6V supply, allowing the MAX12555 to interface with various logic levels. The MAX12555 is available in a 6mm x 6mm x 0.8mm, 40-pin thin QFN package with exposed paddle (EP), and is specified for the extended industrial (-40°C to +85°C) temperature range. See a parametric table of the complete family of pin-compatible, 12-/14-bit high-speed ADCs.

Key Features Direct IF Sampling Up to 400MHz Excellent Dynamic Performance 74dB/72dB SNR at fIN = 3MHz/175MHz 87.4dBc/76.2dBc SFDR at fIN = 3MHz/175MHz Low Noise Floor: 74.6dBFS 3.3V Low-Power Operation 465mW (Single-Ended Clock Mode) 497mW (Differential Clock Mode) 300µW (Power-Down Mode) Fully Differential or Single-Ended Analog Input Adjustable Full-Scale Analog Input Range ±0.35V to ±1.10V Common-Mode Reference CMOS-Compatible Outputs in Two's Complement or Gray Code Data-Valid Indicator Simplifies Digital Interface Data Out-of-Range Indicator Miniature, 6mm x 6mm x 0.8mm 40-Pin Thin QFN Package with Exposed Paddle Evaluation Kit Available (Order MAX12555EVKIT)

MAX12555: Functional Diagram Applications/Uses IF and Baseband Communication Receivers: Cellular, Point-to-Point Microwave, HFC, WLAN Low-Power Data Acquisition Medical Imaging Including Positron Emission Tomography (PET) Portable Instrumentation Video Imaging

DataSheet

Parametrics

Design kits & evaluation modules

• MAX12553EVKIT
• MAX12554EVKIT
• MAX12555EVKIT

Related Products

• MAX19538：12-Bit, 95Msps, 3.3V ADC
• MAX12554：14-Bit, 80Msps, 3.3V ADC
• MAX1208：12-Bit, 80Msps, 3.3V ADC
• MAX1209：12-Bit, 80Msps, 3.3V IF-Sampling ADC
• MAX12553：14-Bit, 65Msps, 3.3V ADC
• MAX1206：12-Bit, 40Msps ADC
• MAX1207：12-Bit, 65Msps ADC
• MAX1211：12-Bit, 65Msps, IF Sampling ADC

Ordering Information