The MAX1420, 3.3V, 12-bit analog-to-digital converter (ADC) features a fully-differential input, pipelined, 12-stage ADC architecture with wideband track-and-hold (T/H) and digital error correction, incorporating a fully-differential signal path. The MAX1420 is optimized for low-power, high dynamic performance applications in imaging and digital communications. The converter operates from a single 3.3V supply, and consumes only 221mW. The fully-differential input stage has a small signal -3dB bandwidth of 400MHz and may be operated with single-ended inputs. An internal 2.048V precision bandgap reference sets the full-scale range of the ADC. A flexible reference structure accommodates an internal reference, or externally applied buffered or unbuffered reference for applications that require increased accuracy and a different input voltage range. In addition to low operating power, the MAX1420 features two power-down modes: reference power-down and shutdown mode. In reference power-down, the internal bandgap reference is deactivated, which results in a typical 2mA supply current reduction. A full shutdown mode is available to maximize power savings during idle periods. The MAX1420 provides parallel, offset binary, CMOS-compatible three-state outputs. The MAX1420 is available in a 7mm x 7mm x 1.4mm, 48-pin TQFP package, and is specified over the commercial (0°C to +70°C) and the extended industrial (-40°C to +85°C) temperature range. Pin-compatible lower speed versions of the MAX1420 are also available. Please refer to the MAX1421 data sheet for 40Msps and the MAX1422 data sheet for 20Msps.
title | Download file |
---|---|
MAX1420 Data Sheet | MAX1420.pdf |
Part Number | Input Chan. | Resolution (bits) | Sample Rate (Msps) | AC Specs (MHz) | SFDR (dBc) | ENOB (bits) | SINAD (dB) | SNR (dB) | THD (dB) | DNL (±LSB) | INL (±LSB) | Full Pwr. BW (MHz) | ICC (mA) | Data Bus Interface | Package/Pins |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
max ≥ | @ fIN | min | min | min | typ | ||||||||||
MAX1420 | 1 | 12 | 60 | 15 | 72 | 10.2 | 63 | 66 | -69 | 1 | 2 | 150 | 75 | µP/12 | LQFP/48 |
Part Number | Status | Recommended Replacement | Package | Temp | RoHS |
---|---|---|---|---|---|
MAX1420CCM+D | No Longer Available | LQFP;48 pin | 0°C to +70°C | See data sheet | |
MAX1420CCM+TD | No Longer Available | LQFP;48 pin | 0°C to +70°C | See data sheet | |
MAX1420CCM-D | No Longer Available | MAX1420ECM+ | LQFP,;48 pin;82.8 mm² | 0°C to +70°C | No |
MAX1420CCM-TD | No Longer Available | MAX1420ECM+ | LQFP;48 pin | 0°C to +70°C | See data sheet |
MAX1420ECM+ | Active | LQFP,;48 pin;82.8 mm² | -40°C to +85°C | Lead Free | |
MAX1420ECM+D | No Longer Available | MAX1420ECM+ | LQFP,;48 pin;82.8 mm² | -40°C to +85°C | Lead Free |
MAX1420ECM+T | No Longer Available | LQFP,;48 pin;82.8 mm² | -40°C to +85°C | Lead Free | |
MAX1420ECM+TD | No Longer Available | MAX1420ECM+ | LQFP;48 pin | -40°C to +85°C | See data sheet |
MAX1420ECM-D | No Longer Available | MAX1420ECM+ | LQFP,;48 pin;82.8 mm² | -40°C to +85°C | No |
MAX1420ECM-TD | No Longer Available | MAX1420ECM+T | LQFP,;48 pin;82.8 mm² | -40°C to +85°C | No |