• 简体中文
• English

MAX14504：Dual SPDT Negative Rail Analog Switch with ±VCC Capability

Industry's First ±VCC Capable Switch

The MAX14504/MAX14505/MAX14505A/MAX14506 dual single-pole/double-throw (SPDT) audio switches feature negative signal capability that allows signals from -VCC to +VCC to pass without distortion. They feature high continuous current ratings of 550mA (continuous) and 850mA (pulsed). These analog switches have low on-resistance, low supply current, and operate from a single +2.3V to +5.5V supply. The MAX14505/MAX14505A have internal shunt switches that discharge the audio amplifier AC-coupling capacitance at the normally open (NO) terminals. This reduces click-and-pop sounds that occur when switching audio signals between precharged points. The MAX14504/MAX14505/MAX14505A/MAX14506 control the switches with control bit, CB, and feature an enable input, active-low EN, that place COM in a high-impedance mode. The MAX14504/MAX14505/MAX14505A/MAX14506 are fully specified to operate from a single +2.3V to +5.5V power supply. These devices are available in a 1.56mm x 2.14mm, 12-bump WLP package, and operate over the -40°C to +85°C extended temperature range.

Key Features Distortion-Free Negative Signal Throughput from -VCC to +VCC Internal Shunt Switches Reduce Click/Pop (MAX14505/MAX14505A) Low On-Resistance 0.36Ω (typ) 1mΩ (typ) On-Resistance Flatness COM High Impedance for Active-Low EN = High Low 0.2µA (max) Shutdown Current (MAX14505A/MAX14506) +2.3V to +5.5V Single-Supply Voltage Small, 1.56mm x 2.14mm, 12-Bump WLP Package

MAX14504, MAX14505, MAX14505A, MAX14506: Typical Operating Circuit Applications/Uses Cell Phones MP3 Players Portable Audio Equipment Speaker Switching

DataSheet

Parametrics

Design kits & evaluation modules

• MAX14504EVKIT

Quality and Environmental Data

• MAX14504.pdf

Related Products

• MAX4991：Low RON, Dual-SPDT/Single-DPDT Analog Switches with Slow Turn-On Time
• MAX4992：Low RON, Dual-SPDT/Single-DPDT Analog Switches with Slow Turn-On Time
• MAX4993：Low RON, Dual-SPDT/Single-DPDT Analog Switches with Slow Turn-On Time
• MAX4744：Low-Voltage, Dual SPDT, Audio Clickless Switches with Negative Rail Capability
• MAX4744H：Low-Voltage, Dual SPDT, Audio Clickless Switches with Negative Rail Capability
• MAX4765：Low-Voltage, Dual SPDT, Audio Clickless Switches with Negative Rail Capability
• MAX4763：Low-Voltage, Dual SPDT, Audio Clickless Switches with Negative Rail Capability
• MAX4764：Low-Voltage, Dual SPDT, Audio Clickless Switches with Negative Rail Capability
• MAX4762：Low-Voltage, Dual SPDT, Audio Clickless Switches with Negative Rail Capability

Ordering Information