• 简体中文
• English

MAX14763：Above- and Below-the-Rails Low On-Resistance Analog Switches

±25V Above- and Below-the-Rails Switches Simplify Supplies

The MAX14759/MAX14761/MAX14763 analog switches are capable of passing bipolar signals that are beyond their supply rails. These devices operate from a single +3.0V to +5.5V supply and support signals in the -25V to +25V range. The MAX14759 is a single-pole/single-throw (SPST) analog switch, while the MAX14761 is a dual-SPST analog switch. The MAX14763 is a single-pole/double-throw (SPDT) analog switch. The MAX14759 features 1Ω (max) on-resistance with a ±200nA (max) on-leakage current. The MAX14761/MAX14763 feature 2Ω (max) on-resistance with a ±100nA (max) on-leakage current. The low on-resistance and high bandwidth allow use in digital- and analog-signal switching applications. The MAX14759/MAX14763 are available in an 8-pin (3mm x 3mm) TDFN package. The MAX14761 is available in a 10-pin (3mm x 3mm) TDFN package. These devices are specified over the -40°C to +85°C extended temperature range.

Key Features Simplify Power-Supply Requirements +3.0V to +5.5V Supply Range -25V to +25V Signal Range High Performance Low 1Ω (max) or 2Ω (max) On-Resistance Low 2.4mΩ (typ) and 5.1mΩ (typ) RON Flatness 500mA (max) Switch Current for MAX14759 Thermal Shutdown Protection -40°C to +85°C Operating Temperature Range High Bandwidth: 100MHz (typ) Insertion Loss High-ESD Protection Up to 2kV Save Board Space Small 8-Pin and 10-Pin TDFN Packages

MAX14759, MAX14761, MAX14763: Functional Diagrams Applications/Uses ATE Systems Audio Signal Routing and Switching CAN Bus Termination Switching Industrial Measurement Systems Instrumentation Systems Medical Systems Opto-Relay Replacement RS-485 Termination Switching

DataSheet

Parametrics

Design kits & evaluation modules

• MAX147XXEVKIT

Quality and Environmental Data

• MAX14763.pdf

Ordering Information