• 简体中文
• English

MAX1490EA, MAX1490EB：±15kV ESD-Protected, Isolated RS-485/RS-422 Data Interfaces

The MAX1480EA/MAX1480EC/MAX1490EA/MAX1490EB are complete, electrically isolated, RS-485/RS-422 data communications interface solutions in a hybrid microcircuit. The RS-485/RS-422 I/O pins are protected against ±15kV electrostatic discharge (ESD) shocks, without latchup. Transceivers, optocouplers, and a transformer provide a complete interface in a standard DIP package. A single +5V supply on the logic side powers both sides of the interface. The MAX1480EC/MAX1490EB feature reduced-slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, allowing error-free data transmission at data rates up to 160kbps. The MAX1480EA/MAX1490EA driver slew rate is not limited, allowing transmission rates up to 2.5Mbps. The MAX1480EA/MAX1480EC are designed for half-duplex communication, while the MAX1490EA/MAX1490EB feature full-duplex communication. Drivers are short-circuit current limited and protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a known output (RO low for the MAX1480EA/MAX1480EC, active-low RO high for the MAX1490EA/ MAX1490EB) if the input is open circuit. The MAX1480EA/MAX1480EC/MAX1490EA/MAX1490EB withstand 1260VRMS (1min) or 1520VRMS (1s). Their isolated outputs meet all RS-485/RS-422 specifications. The MAX1480EA/MAX1480EC are available in a 28-pin DIP package, and the MAX1490EA/MAX1490EB are available in a 24-pin DIP package.

Key Features Isolated Data Interface, Guaranteed to 1260VRMS (1min) +15kV ESD Protection on I/O Pins Slew-Rate Limited for Errorless Data Transmission (MAX1480EC/MAX1490EB) High-Speed, Isolated, 2.5Mbps RS-485/RS-422 Interface (MAX1480EA/MAX1490EA) Full-Duplex Data Communication (MAX1490EA/MAX1490EB) Single +5V Supply Current Limiting and Thermal Shutdown for Driver Overload Protection Standard 0.6in DIP Packages 28-Pin DIP (MAX1480EA/MAX1480EC) 24-Pin DIP (MAX1490EA/MAX1490EB)

MAX1480E: Pin Configuration Applications/Uses Automated Test Equipment (ATE) HVAC/Building Control Networks Industrial Control Local Area Networks Isolated RS-485/RS-422 Data Interface Telecom Transceivers for EMI-Sensitive Applications

DataSheet

Parametrics

Related Products

• MAX1480B：Complete, Isolated RS-485/RS-422 Data Interface
• MAX1490B：Complete, Isolated RS-485/RS-422 Data Interface
• MAX1490A：Complete, Isolated RS-485/RS-422 Data Interface
• MAX1480C：Complete, Isolated RS-485/RS-422 Data Interface
• MAX1480A：Complete, Isolated RS-485/RS-422 Data Interface

Ordering Information