• 简体中文
• English

MAX14913：Octal High-Speed, High-Side Switch/Push-Pull Driver

Industry's Most Robust and Fastest 24V Driver, Capable of 200kHz Switching Rate, Improves Factory Throughput

The MAX14912/MAX14913 have eight 640mA smart high-side switches that can also be configured as push-pull drivers for high-speed switching. The propagation delay from input to switching of the high-side/low-side drivers is 1µs (max). Each high-side driver has a low on-resistance of 230mΩ (max) at 500mA load current at TA = 125°C. The device is configured and controlled either through pins or the SPI interface. The SPI interface is daisy-chainable, which allows efficient cascading of multiple devices. SPI also supports command mode, for the highest detailed diagnostic information. The MAX14912 allows configuration through SPI in parallel and serial setting modes, while the MAX14913 only supports configuration through SPI in serial setting mode. Open-load detection in high-side mode detects both open-wire conditions in the switch on/off states, and LED drivers provide indication of per-channel fault and status conditions. Internal active clamps accelerate the shutdown of inductive loads fast in high-side mode. The MAX14912/MAX14913 are available in a 56-pin QFN 8mm x 8mm package.

Key Features Low Power and Heat Dissipation 230mΩ (max) High-Side RON at TA = 125°C High-Efficiency 5V/100mA Buck Regulator Fast Switching Ideal for High-Speed Control Systems 0.1µs (typ.) Propagation Delay (High-Side Mode) 0.5µs (typ.) Propagation Delay (Push-Pull Mode) 200kHz Switching-Rate Capability in Push-Pull Mode Fast Inductive Load Demagnetization Robust Operation 60V Abs Max VDD Rating Safe-Demagnetization: Turn-Off of Unlimited Inductance IEC61000-4-2 8kV Air Gap/6kV Contact ESD Protection ±1kV/42Ω Surge Protection with TVS on VDD Robust SPI Interface with Watchdog and CRC -40°C to +125°C Ambient Operating Temperature Range Extensive Diagnostics Reduces System Downtime Per Driver and Chip Thermal Shutdown Open-Wire Detection in High-Side Mode Low Supply Voltage Warning Undervoltage Detection Overvoltage Detection on OUT Overcurrent Detection LED Drivers for Visual Fault and Output State Indication Flexible Interface for Ease of Design Serial and/or Parallel Control Interface Per-Channel Configuration and Monitoring Wide Logic Voltage Range (1.6V to 5.5V) Small Package and High Integration Enables Compact High-Density I/O Modules 56-Pin QFN 8mm x 8mm Package Eight High-Side Switches/Push-Pull Drivers Daisy-Chainable SPI Interface

MAX14912, MAX14913: Functional (or Block) Diagram Applications/Uses Building Automation Industrial Digital Outputs PLC Systems

DataSheet

Parametrics

Design kits & evaluation modules

• MAX14912EVKIT
• MAX14913EVKIT
• MAXREFDES150

Related Products

• MAX14900E：Octal, High-Speed, Industrial, High-Side Switch

Ordering Information