• 简体中文
• English

MAX1808：Micropower Adjustable Overvoltage Protection Controllers

The MAX1807/MAX1808 monitor up to five supply rails for an overvoltage condition and provide a latched output when any one of the five supplies exceeds the trip thresholds. The latched output drives an external P-channel load switch to remove power when an over-voltage condition is detected. The latch is reset when a logic low is input to ON or the power supply is cycled. The MAX1807 provides a 28V open-drain fault output that can be used to trigger an alert, trip a resetable fuse, or for other purposes. The MAX1808 includes a low-battery comparator with hysteresis to drive the DP output high, turning off the external P-channel switch when the input voltage is too low. The MAX1807/MAX1808 are available in a miniature 10-pin µMAX® package.

Key Features Five 3% Accurate Overvoltage Comparators Series PFET Gate Driver with VGS Limiter 21µA Quiescent Supply Current 4µA Shutdown Current 4.4V to 28V Operating Voltage Range 3% Accurate Comparator with 10% Hysteresis for Low-Battery Detection (MAX1808) 28V Open-Drain N-Channel Output (MAX1807) Small 10-Pin µMAX Package

MAX1807, MAX1808: Typical Operating Circuit Applications/Uses Multi-Output Power Supplies Notebook Computers Power-Supply Modules

DataSheet

Parametrics

Ordering Information