• 简体中文
• English

MAX19793：1500MHz to 6000MHz Dual Analog Voltage Variable Attenuator with On-Chip 10-Bit SPI-Controlled DAC

High-Performance RF VVA Features 46.6dB of Linearly Controlled Dynamic Range and Excellent Attenuation Flatness

The MAX19793 dual general-purpose analog voltage variable attenuator (VVA) is designed to interface with 50Ω systems operating in the 1500MHz to 6000MHz frequency range. The device includes a patented control circuit that provides 23.3dB of attenuation range (per attenuator) with a typical linear control slope of 8.4dB/V. Both attenuators share a common analog control and can be cascaded together to yield 46.6dB of total attenuation range with a typical combined linear control slope of 16.8dB/V (5V operation). Alternatively, the on-chip 4-wire SPI-controlled 10-bit DAC can be used to control both attenuators. In addition, a step-up/down feature allows user-programmable attenuator stepping through command pulses without reprogramming the SPI interface. The MAX19793 is a monolithic device designed using one of Maxim's proprietary SiGe BiCMOS processes. The part operates from a single +5V supply or alternatively from a single +3.3V supply. It is available in a compact 36-pin TQFN package (6mm x 6mm x 0.8mm) with an exposed pad. Electrical performance is guaranteed over the -40°C to +100°C extended temperature range.

Key Features Wideband Coverage 1500MHz to 6000MHz RF Frequency Range High Linearity Greater Than +37dBm IIP3 Over the Full Attenuation Range +23.7dBm Input P1dB Integrates Two Analog Attenuators in One Monolithic Device Two Convenient Control Options Single Analog Voltage On-Chip SPI-Controlled 10-Bit DAC Step-Up/Down Pulse Command Inputs Flexible Attenuation Control Ranges 23.3dB (Per Attenuator) 46.6dB (Both Attenuators Cascaded) Linear dB/V Analog Control Response Curve Simplifies Automatic Leveling Control and Gain-Trim Algorithms Excellent Attenuation Flatness Over Wide Frequency Ranges and Attenuation Settings On-Chip Comparator (for Successive Approximation Measurement of Attenuator Control Voltage) Low 13mA Supply Current Single 5V or 3.3V Supply Voltage Pin-Compatible with the MAX19791 and MAX19792 Pin-Compatible with the MAX19794 with Addition of Two Shunt Capacitors PCB-Compatible with the MAX19790 Lead(Pb)-Free Package

MAX19793: Typical Application Circuit Applications/Uses Automatic Level Control (ALC) Broadband System Applications, Including Wireless Infrastructure Digital and Spread-Spectrum Communication Systems General Test Equipment Lineup Gain Trim Microwave Point-to-Point Systems Receiver Gain Control Temperature-Compensation Circuits Transmitter Gain Control VSAT/Satellite Modems WCDMA/LTE, TD-SCDMA/TD-LTE, WiMAX®, cdma2000®, GSM/EDGE, and MMDS Base Stations

DataSheet

Parametrics

Related Products

• MAX19791：50MHz to 4000MHz Dual Analog Voltage Variable Attenuator with On-Chip 10-Bit SPI-Controlled DAC
• MAX19794：10MHz to 500MHz Dual Analog Voltage Variable Attenuator with On-Chip 10-Bit SPI-Controlled DAC
• MAX19792：500MHz to 4000MHz Dual Analog Voltage Variable Attenuator with On-Chip 10-Bit SPI-Controlled DAC
• MAX19790：250MHz to 4000MHz Dual, Analog Voltage Variable Attenuator

Ordering Information