• 简体中文
• English

MAX2624：Monolithic Voltage Controlled Oscillators

Fully monolithic 900MHz SiGe VCO and Buffer in 8-Pin µMAX Package Replaces Modules

The MAX2622/MAX2623/MAX2624 self-contained voltage-controlled oscillators (VCOs) combine an integrated oscillator and output buffer in a miniature 8-pin µMAX® package. The inductor and varactor elements of the tank circuits are integrated on-chip, greatly simplifying application of the part. In addition, the center frequency of oscillation and frequency span are factory preset to provide a guaranteed frequency range versus control voltage. An external tuning voltage controls the oscillation frequency. The output signals are buffered by an amplifier stage (easily matched to 50Ω), using only capacitors to provide higher output power and isolate the devices from load impedance variations. The MAX2622/MAX2623/MAX2624 operate from a +2.7V to +3.3V supply voltage and require only 9mA of supply current. In shutdown mode, the supply current is reduced to 0.1µA.

Key Features Fully Monolithic Guaranteed Performance On-Chip 50Ω Output Match Wide Choice of Frequencies 855MHz to 881MHz (MAX2622) 885MHz to 950MHz (MAX2623) 947MHz to 998MHz (MAX2624) +2.7V to +3.3V Single-Supply Operation Low-Current Shutdown Mode Smaller than Modules (8-pin µMAX package)

MAX2622, MAX2623, MAX2624: Typical Operating Circuit Applications/Uses 866MHz to 868MHz European ISM Band (MAX2622) 902MHz to 928MHz ISM Band, ±10.7MHz IF (MAX2623) 902MHz to 928MHz ISM Band, 45MHz to 70MHz IF (MAX2624) DECT 1/2 Frequency LO (MAX2623)

DataSheet

Parametrics

Design kits & evaluation modules

• MAX2622EVKIT
• MAX2623EVKIT
• MAX2624EVKIT

Related Products

• MAX2472：500MHz to 2500MHz, VCO Buffer Amplifiers
• MAX2620：10MHz to 1050MHz Integrated RF Oscillator with Buffered Outputs

Ordering Information