• 简体中文
• English

MAX2641：300MHz to 2500MHz SiGe Ultra-Low-Noise Amplifiers

The MAX2640/MAX2641 are low-cost, ultra-low-noise amplifiers designed for applications in the cellular, PCS, GPS, and 2.4GHz ISM frequency bands. Operating from a single +2.7V to +5.5V supply, these devices consume only 3.5mA of current while providing a low noise figure, high gain, high input IP3, and an operating frequency range that extends from 300MHz to 2500MHz. The MAX2640 is optimized for 300MHz to 1500MHz applications, with a typical performance of 15.1dB gain, input IP3 of -10dBm, and a noise figure of 0.9dB at 900MHz. The MAX2641 is optimized for 1400MHz to 2500MHz applications, with a typical performance of 14.4dB gain, an input IP3 of -4dBm, and a noise figure of 1.3dB at 1900MHz. These devices are internally biased, eliminating the need for external bias resistors and chokes. In a typical application, the only external components needed are a two-element input match, input and output blocking capacitors, and a VCC bypass capacitor. The MAX2640/MAX2641 are designed on a high-frequency, low-noise, advanced silicon-germanium process and are offered in the space-saving 6-pin SOT23 package.

Key Features Wide Operating Frequency Range MAX2640: 300MHz to 1500MHz MAX2641: 1400MHz to 2500MHz Low Noise Figure High Gain High Reverse Isolation +2.7V to +5.5V Single-Supply Operation Low 3.5mA Supply Current Ultra-Small SOT23-6 Package

MAX2640, MAX2641: Typical Operating Circuit Applications/Uses 400MHz/900MHz/2.4GHz ISM-Band Radios Cellular/PCS Handsets Cordless Phones GPS Receivers Wireless Data Wireless Local Area Networks (WLANs)

DataSheet

Parametrics

Design kits & evaluation modules

• MAX2640EVKIT
• MAX2641EVKIT

Ordering Information