• 简体中文
• English

MAX4080：76V, High-Side, Current-Sense Amplifiers with Voltage Output

Current-Sense Amplifiers Achieve 0.1% Accuracy with Operation Up to 76V

The MAX4080/MAX4081 are high-side, current-sense amplifiers with an input voltage range that extends from 4.5V to 76V making them ideal for telecom, automotive, backplane, and other systems where high-voltage current monitoring is critical. The MAX4080 is designed for unidirectional current-sense applications and the MAX4081 allows bidirectional current sensing. The MAX4081 single output pin continuously monitors the transition from charge to discharge and avoids the need for a separate polarity output. The MAX4081 requires an external reference to set the zero-current output level (VSENSE = 0V). The charging current is represented by an output voltage from VREF to VCC, while discharge current is given from VREF to GND. For maximum versatility, the 76V input voltage range applies independently to both supply voltage (VCC) and common-mode input voltage (VRS+). High-side current monitoring does not interfere with the ground path of the load being measured, making the MAX4080/MAX4081 particularly useful in a wide range of high-voltage systems. The combination of three gain versions (5V/V, 20V/V, 60V/V = F, T, S suffix) and a user-selectable, external sense resistor sets the full-scale current reading and its proportional output voltage. The MAX4080/MAX4081 offer a high level of integration, resulting in a simple, accurate, and compact current-sense solution. The MAX4080/MAX4081 operate from a 4.5V to 76V single supply and draw only 75µA of supply current. These devices are specified over the automotive operating temperature range (-40°C to +125°C) and are available in a space-saving 8-pin µMAX® or SO package.

Key Features Ideal for High-Voltage Current Monitoring Applications Wide 4.5V to 76V Input Common-Mode Range Independent Operating Supply Voltage High Accuracy and Low Quiescent Current Support Precision Application Requirements ±0.1% Full-Scale Accuracy Low 100µV Input Offset Voltage Three Gain Versions Available 5V/V (MAX4080F/MAX4081F) 20V/V (MAX4080T/MAX4081T) 60V/V (MAX4080S/MAX4081S) 75µA Supply Current (MAX4080) Flexible Current Sensing Supports Monitoring of Charge and Discharge of Batteries Bidirectional (MAX4081) or Unidirectional(MAX4080) ISENSE Reference Input for Bidirectional OUT (MAX4081) Minimizes Required Board Space 8-Pin µMAX Package

MAX4080, MAX4081: Typical Operating Circuit Applications/Uses 48V Telecom and Backplane Current Measurement Automotive (12V, 24V, or 42V Batteries) Avalanche Photodiode and PIN-Diode Current Monitoring Bidirectional Motor Control General System/Board-Level Current Sensing Power-Management Systems Precision High-Voltage Current Sources

DataSheet

Parametrics

Design kits & evaluation modules

• MAX4080EVKIT

Quality and Environmental Data

• MAX4080.pdf

Related Products

• MAX4070：Bidirectional, High-Side, Current-Sense Amplifiers with Reference
• MAX4073：Low-Cost, SC70, Voltage-Output, High-Side Current-Sense Amplifier

Ordering Information