• 简体中文
• English

MAX4381：Ultra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs and Disable

The MAX4380–MAX4384 family of op amps are unity-gain-stable devices that combine high-speed performance, rail-to-rail outputs, and high-impedance disable mode. These devices operate from a +4.5V to +11V single supply or from ±2.25V to ±5.5V dual supplies. The common-mode input voltage range extends beyond the negative power-supply rail (ground in single-supply applications). The MAX4380–MAX4384 require only 5.5mA of quiescent supply current per op amp while achieving a 210MHz -3dB bandwidth, 55MHz 0.1dB gain flatness and a 485V/µs slew rate. These devices are an excellent solution in low-power/low-voltage systems that require wide bandwidth, such as video, communications, and instrumentation. The MAX4380 single with disable is available in an ultra-small 6-pin SC70 package.

Key Features Low Cost and High Speed: 210MHz -3dB Bandwidth 55MHz 0.1dB Gain Flatness 485V/µs Slew Rate Disable Mode Places Outputs in High-Impedance State Single +4.5V to +11V Operation Rail-to-Rail Outputs Input Common-Mode Range Extends Beyond VEE Low Differential Gain/Phase: 0.02%/0.08° Low Distortion at 5MHz -65dBc SFDR -63dB Total Harmonic Distortion Ultra-Small 6-Pin SC70, 6-Pin SOT23, 10-Pin µMAX®, 14-Pin TSSOP, and 20-Pin TSSOP Packages

MAX4380, MAX4381, MAX4382, MAX4383, MAX4384: Typical Operating Circuit Applications/Uses Analog-to-Digital Converter Interface Battery-Powered Instruments CCD Imaging Systems Digital Cameras Set-Top Boxes Surveillance Video Systems Video Line Driver Video Routing and Switching Systems Video-on-Demand

DataSheet

Parametrics

Design kits & evaluation modules

• MAX4383EVKIT

Quality and Environmental Data

• MAX4381.pdf

Ordering Information