• 简体中文
• English

MAX4480：Single/Dual/Quad, Low-Cost, Single-Supply, Rail-to-Rail Op Amps with Shutdown

The MAX4480–MAX4483 low-cost, general-purpose op amps offer rail-to-rail outputs, draw only 50µA of quiescent current, and operate from a single +2.5V to +5.5V supply. For additional power conservation, the MAX4481 offers a low-power shutdown mode that reduces supply current to 0.5µA (max) and puts the amplifier’s output in a high-impedance state. These devices are unity-gain stable with capacitive loads up to 400pF. The MAX4480–MAX4483 are specified to +125°C, making them suitable for use in a variety of harsh environments. The MAX4480 is a single amplifier offered in a tiny 5-pin SC70 package. The MAX4481 is a single amplifier with a low-power shutdown mode that reduces supply current to < 0.5µA and comes in a 6-pin SC70 package. The MAX4482 is a dual amplifier and comes in the space-saving 8-pin SOT23 or μMAX® package. The MAX4483 is a quad amplifier and comes in a 14-pin TSSOP package. All devices are specified for operation across the -40°C to +125°C automotive temperature range.

Key Features Single +2.5V to +5.5V Supply Voltage Range 50µA Quiescent Current per Amplifier 0.5µA max Shutdown Mode (MAX4481) Available in Space-Saving Packages 5-Pin SC70 (MAX4480) 6-Pin SC70 (MAX4481) 8-Pin SOT23 (MAX4482) 105dB AVOL with 5kΩ Load 0.005% THD with 100kΩ Load Rail-to-Rail Output Voltage Swing 3.0mA of Sink and Source Load Current Unity-Gain Stable up to CLOAD = 400pF

MAX4480, MAX4481, MAX4482, MAX4483: Pin Configurations Applications/Uses Cellular Handsets Digital Cameras (DIGICAMs) Electronic Ignition Modules Glucose Meters GPS Solutions Infrared Receivers Instruments and Terminals IP Camera MP3 and Portable Media Players Portable Communications Sensor Signal Detection Single-Supply Zero-Crossing Detectors

DataSheet

Parametrics

Quality and Environmental Data

• MAX4480.pdf

Ordering Information