MAX4906EF:High-/Full-Speed USB 2.0 Switches with High ESD

ESD-Protected Analog Switches Designed for Portable Low-Power Applications that Require a Switching Function for One or More USB 2.0 Differential Pairs

The MAX4906EF are electrostatic discharge (ESD)-protected analog switches that combine low on-capacitance (CON) and low on-resistance (RON) necessary for high-performance switching applications. The COM_ inputs are protected against ±15kV ESD without latchup or damage. The device is designed for USB 2.0 high-speed applications at 480Mbps. The switches also handle all the requirements for USB low- and full-speed signaling. The MAX4906EF features two single-pole/double-throw (SPDT) switches. The device is fully specified to operate from a single +2.7V to +3.6V power supply and is protected against a +5.5V short to all analog inputs (COM_, NC_, NO_). This feature makes the MAX4906EF fully compliant with the USB 2.0 specification of +5.5V fault protection. The device features a low threshold voltage and a +1.4V VIH, permitting them to be used with low-voltage logic. The device features a active-low QP input that when driven high, turns the charge pump off and sets the device in standby mode. When the device is in standby mode, the quiescent supply current is reduced to 3µA (max) and the switches remain operable. The MAX4906EF is available in a space-saving, 2mm x 2mm µDFN package and operates over a -40°C to +85°C temperature range.

Key Features
  • ±15kV (Human Body Model) ESD Protection, on COM_
  • Fully Specified for a Single +2.7V to +3.6V Power-Supply Voltage
  • Low 4Ω (typ), 7Ω (max) On-Resistance (RON)
  • -3dB Bandwidth: 500MHz (typ)
  • Low Bit-to-Bit Skew ≤ 20ps
  • Charge-Pump Noise = 90µV (typ)
  • Charge-Pump Enable
  • No Need for Logic-Level Shifters for 1.4V or Above
  • COM_ Analog Inputs Fault-Protected Against Shorts to USB Supply Rail Up to +5.5V
  • Low Supply Current 3µA (max) in Standby
  • Space-Saving 10-Pin, 2mm x 2mm µDFN Package
MAX4906EF: Typical Operating Characteristics
MAX4906EF: Typical Operating Characteristics
Applications/Uses
  • Bus Switches
  • Cell Phones
  • Digital Still Cameras
  • Ethernet Switching
  • GPS
  • Notebook Computers
  • PDAs
  • Relay Replacements
  • T3/E3 Switches for Redundancy Protection
  • USB Switching
  • Video Switching
DataSheet
titleDownload file
MAX4906EF Data SheetMAX4906EF.pdf
Parametrics
Part NumberProtocolConfig.ChannelsVSUPPLY (Single)
(V)
VSUPPLY (Single)
(V)
VSIGNAL
(V)
VSIGNAL
(V)
Dynamic Range (max)
(V)
RON
(Ω)
RFLAT(ON)
(Ω)
RFLAT(ON)
(Ω)
Bandwidth
(MHz)
tON
(ns)
tOFF
(ns)
COFF
(pF)
Package/PinsBudgetary
Price
minmaxminmaxmaxmaxtypmaxminmaxSee Notes
MAX4906EFUSB Full-Speed
USB High-Speed
USB Low-Speed
2-to-1
DPDT
233.603.63.6811100060305µDFN/10$1.84 @1k
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX4906EFELB+ActiveµDFN,;10 pin;4.2 mm²-40°C to +85°CLead Free
MAX4906EFELB+TActiveµDFN,;10 pin;4.2 mm²-40°C to +85°CLead Free
MAX4906EFELB-TNo Longer AvailableMAX4906EFELB+TuDFN;-40°C to +85°CSee data sheet
MAX4906EF.pdf MAX4906EF
MAX4906EF.pdf MAX4906EF