• 简体中文
• English

MAX5132：+5V/+3V, 13-Bit, Serial, Force/Sense DACs with 10ppm/°C Internal Reference

Industry's First 10ppm/C Internal Reference 13-Bit DACs

The MAX5132/MAX5133 low-power, 13-bit, voltage-output digital-to-analog converters (DACs) feature an internal precision bandgap reference and output amplifier. The MAX5132 operates on a single +5V supply with an internal reference of +2.5V and offers a configurable output amplifier. If necessary, the user can override the on-chip, <10ppm/°C voltage reference with an external reference. The MAX5133 has the same features as the MAX5132 but operates from a single +3V supply and has an internal +1.25V precision reference. The user-accessible inverting input and output of the amplifier allows specific gain configurations, remote sensing, and high output drive capability for a wide range of force/sense applications. Both devices draw only 500µA of supply current, which reduces to 3µA in power-down mode. In addition, their power-up reset feature allows for a user-selectable initial output state of either 0V or midscale and reduces output glitches during power-up. The serial interface is compatible with SPI™, QSPI™, and MICROWIRE™, which makes the MAX5132/MAX5133 suitable for cascading multiple devices. Each DAC has a double-buffered input organized as an input register followed by a DAC register. A 16-bit shift register loads data into the input register. The DAC register may be updated independently or simultaneously with the input register. Both devices are available in a 16-pin QSOP package and are specified for the extended-industrial (-40°C to +85°C) operating temperature range. For pin-compatible 14-bit upgrades, see the MAX5171/MAX5173 data sheet; for pin-compatible 12-bit versions, see the MAX5122/MAX5123 data sheet.

Key Features Single-Supply Operation +5V (MAX5132) +3V (MAX5133) Built-In 10ppm/°C max Precision Bandgap Reference +2.5V (MAX5132) +1.25V (MAX5133) SPI/QSPI/MICROWIRE-Compatible, 3-Wire Serial Interface Pin-Programmable Shutdown-Mode and Power-Up Reset (0V or Midscale Output Voltage) Buffered Output Capable of Driving 5kΩ 100pF or 4-20mA Loads Space-Saving 16-Pin QSOP Package Pin-Compatible Upgrades for the 12-Bit MAX5122/MAX5123 Pin-Compatible 14-Bit Upgrades Available (MAX5171/MAX5173)

MAX5132, MAX5133: Functional Block Diagram Applications/Uses Automated Test Equipment (ATE) Digital Gain and Offset Control General Purpose Industrial Process Controls Motion Control

DataSheet

Parametrics

Related Products

• MAX5122：+5V/+3V, 12-Bit, Serial, Force/Sense DACs with 10ppm/°C Internal Reference
• MAX5130：+3V/+5V, 13-Bit, Serial, Voltage-Output DACs with Internal Reference
• MAX5351：Low-Power, 13-Bit Voltage-Output DACs with Serial Interface
• MAX535：Low-Power, 13-Bit Voltage-Output DACs with Serial Interface

Ordering Information