• 简体中文
• English

MAX5137：Pin-/Software-Compatible, 16-/12-Bit, Voltage-Output DACs

Industry's Smallest 16-Bit DAC with Pin-Programmable Zero or Midscale Power-Up

The MAX5134–MAX5137 is a family of pin-compatible and software-compatible 16-bit and 12-bit DACs. The MAX5134/MAX5135 are low-power, quad 16-/12-bit, buffered voltage-output, high-linearity DACs. The MAX5136/MAX5137 are low-power, dual 16-/12-bit, buffered voltage-output, high-linearity DACs. They use a precision internal reference or a precision external reference for rail-to-rail operation. The MAX5134–MAX5137 accept a wide +2.7V to +5.25V supply-voltage range to accommodate most low-power and low-voltage applications. These devices accept a 3-wire SPI-/QSPI™-/MICROWIRE®-/DSP-compatible serial interface to save board space and reduce the complexity of optically isolated and transformer-isolated applications. The digital interface’s double-buffered hardware and software active-low LDAC provide simultaneous output updates. The serial interface features an active-low READY output for easy daisy-chaining of several MAX5134–MAX5137 devices and/or other compatible devices. The MAX5134–MAX5137 include a hardware input to reset the DAC outputs to zero or midscale upon power-up or reset, providing additional safety for applications that drive valves or other transducers that need to be off during power-up. The high linearity of the DACs makes these devices ideal for precision control and instrumentation applications. The MAX5134–MAX5137 are available in an ultra-small (4mm x 4mm), 24-pin TQFN package or a 16-pin TSSOP package. Both packages are specified over the -40°C to +105°C extended industrial temperature range.

Key Features 16-/12-Bit Resolution Available in a 4mm x 4mm, 24-Pin TQFN Package or 16-Pin TSSOP Hardware-Selectable to Zero/Midscale DAC Output on Power-Up or Reset Double-Buffered Input Registers Active-Low LDAC Asynchronously Updates DAC Outputs Simultaneously Active-Low READY Facilitates Daisy Chaining High-Performance 10ppm/°C Internal Reference Guaranteed Monotonic Over All Operating Conditions Wide +2.7V to +5.25V Supply Range Rail-to-Rail Buffered Output Operation Low Gain Error (Less Than ±0.5%FS) and Offset (Less Than ±10mV) 30MHz 3-Wire SPI-/QSPI-/MICROWIRE-/DSP-Compatible Serial Interface CMOS-Compatible Inputs with Hysteresis Low-Power Consumption (ISHDN = 2µA max)

MAX5134, MAX5135, MAX5136, MAX5137: Typical Operating Circuit Applications/Uses Automatic Test Equipment Automatic Tuning Communication Systems Data Acquisition Gain and Offset Adjustment Portable Instrumentation Power-Amplifier Control Process Control and Servo Loops Programmable Voltage and Current Sources

DataSheet

Parametrics

Design kits & evaluation modules

• MAX5134EVKIT
• MAXSPCSPARTAN6

Quality and Environmental Data

• MAX5137.pdf

Ordering Information