MAX5143：+3V/+5V, Serial-Input, Voltage-Output, 14-Bit DACs

Ultra Small 14-Bit DAC in a µMAX Package Offers Low-Power Solution

The MAX5141—MAX5144 are serial-input, voltage-output, 14-bit digital-to-analog converters (DACs) in tiny µMAX® packages, 50% smaller than comparable DACs in an 8-pin SO. They operate from low +3V (MAX5143/MAX5144) or +5V (MAX5141/MAX5142) single supplies. They provide 14-bit performance (±1 LSB INL and DNL) over temperature without any adjustments. The DAC output is unbuffered, resulting in a low supply current of 120µA and a low offset error of 2 LSBs. The DAC output range is 0V to VREF. For bipolar operation, matched scaling resistors are provided in the MAX5142/MAX5144 for use with an external precision op amp (such as the MAX400), generating a ±VREF output swing. A 16-bit serial word is used to load data into the DAC latch. The 25MHz, 3-wire serial interface is compatible with SPI™/QSPI™/MICROWIRE™, and can interface directly with optocouplers for applications requiring isolation. A power-on reset circuit clears the DAC output to code 0 (MAX5141/MAX5143) or code 8192 (MAX5142/MAX5144) when power is initially applied. A logic low on active-low CLR asynchronously clears the DAC output to code 0 (MAX5141/MAX5143) or code 8192 (MAX5142/MAX5144), independent of the serial interface. The MAX5141/MAX5143 are available in 8-pin µMAX packages and the MAX5142/MAX5144 are available in 10-pin µMAX packages.

Key Features

Ultra-Small (3mm x 5mm) 8-Pin µMAX Package
Low 120µA Supply Current
Fast 1µs Settling Time
25MHz SPI/QSPI/MICROWIRE-Compatible Serial Interface
VREF Range Extends to VDD
+5V (MAX5141/MAX5142) or +3V (MAX5143/MAX5144) Single-Supply Operation
Full 14-Bit Performance Without Adjustments
Unbuffered Voltage Output Directly Drives 60kΩ Loads
Power-On Reset Circuit Clears DAC Output to Code 0 (MAX5141/MAX5143) or Code 8192 (MAX5142/MAX5144)
Schmitt-Trigger Inputs for Direct Optocoupler Interface
Asynchronous Active-Low CLR

MAX5141, MAX5142, MAX5143, MAX5144: Functional Block Diagrams

Applications/Uses

Automated Test Equipment (ATE)
Data Acquisition
High-Resolution and Gain Adjustment
Industrial Process Controls

DataSheet

title	Download file
MAX5141-MAX5144 Data Sheet	MAX5141-MAX5144.pdf

Parametrics

Part Number	Resolution (bits)	Channels	Output Type	Reference	INL (±LSB)	Interface	Supply Range (V)	Supply Range (V)	I_CC (mA)	Settling Time (µs)	Package/Pins	Oper. Temp. (°C)	Budgetary Price
Part Number	Resolution (bits)	Channels	Output Type	Reference	max	Interface	min	max	max	typ	Package/Pins	Oper. Temp. (°C)	See Notes
MAX5141	14	1	Voltage- Unbuffered	Ext.	1	Serial - SPI	4.5	5.5	0.2	1	µMAX/8	-40 to +85	$7.08 @1k
MAX5142							4.5	5.5			µMAX/10		$5.88 @1k
MAX5143							2.7	3.6			µMAX/8		$5.88 @1k
MAX5144							2.7	3.6			µMAX/10		$7.08 @1k

Quality and Environmental Data

MAX5143.pdf

Ordering Information

Part Number	Status	Recommended Replacement	Package	Temp	RoHS
MAX5143EUA	No Longer Available	MAX5143EUA+	µMAX,;8 pin;15.6 mm²	-40°C to +85°C	No
MAX5143EUA+	Active		µMAX,;8 pin;15.6 mm²	-40°C to +85°C	Lead Free
MAX5143EUA+T	Active		µMAX,;8 pin;15.6 mm²	-40°C to +85°C	Lead Free
MAX5143EUA-T	No Longer Available	MAX5143EUA+T	µMAX,;8 pin;15.6 mm²	-40°C to +85°C	No